Welcome, Guest. Please login or register.
Forums
« previous next »
Pages: [1]   Go Down

Author Topic: Native IDE Optical Drive Audio...  (Read 2300 times)

Description:

0 Members and 1 Guest are viewing this topic.

Offline Oldsmobile_Mike

Re: Native IDE Optical Drive Audio...
« on: April 14, 2014, 07:32:05 PM »
Back in the day I built a small switcher using a couple flip-toggle switches so I could switch between CD output and Amiga output.  I *think* feeding the audio output from the CD drive directly into the Amiga audio output pins could do "bad things" but this is just a hunch.  Good luck!  :)
Logged
Amiga 500: 2MB Chip|16MB Fast|30MHz 68030+68882|3.9|Indivision ECS|GVP A500HD+|Mechware card reader + 8GB CF|Cocolino|SCSI DVD-RAM
Amiga 2000: 2MB Chip|136MB Fast|50MHz 68060|3.9|Indivision ECS + GVP Spectrum|Mechware card reader + 8GB CF|AD516|X-Surf 100|RapidRoad|Cocolino|SCSI CD-RW
 Amiga videos and other misc. stuff at https://www.youtube.com/CompTechMike/videos
 

Offline Oldsmobile_Mike

Re: Native IDE Optical Drive Audio...
« Reply #1 on: April 14, 2014, 10:06:25 PM »
AFAIK the A4000 had a header for mixing CD audio.

Also check out the link mentioned in this thread for making a mixer:

http://www.amiga.org/forums/showthread.php?t=60552
Logged
Amiga 500: 2MB Chip|16MB Fast|30MHz 68030+68882|3.9|Indivision ECS|GVP A500HD+|Mechware card reader + 8GB CF|Cocolino|SCSI DVD-RAM
Amiga 2000: 2MB Chip|136MB Fast|50MHz 68060|3.9|Indivision ECS + GVP Spectrum|Mechware card reader + 8GB CF|AD516|X-Surf 100|RapidRoad|Cocolino|SCSI CD-RW
 Amiga videos and other misc. stuff at https://www.youtube.com/CompTechMike/videos
 
Pages: [1]   Go Up
« previous next »