Welcome, Guest. Please login or register.

Author Topic: Amiga 1000 and supra hard drive setup  (Read 4024 times)

Description:

0 Members and 1 Guest are viewing this topic.

Offline Oldsmobile_Mike

Re: Amiga 1000 and supra hard drive setup
« on: September 02, 2003, 09:17:15 AM »
Quote
I can partition it and low level format it but


Oh God, not the low level formatting again!  Jman, there is another (very long) thread already on this subject from several days ago.  Low level formatting is something that is done by the manufacturer, at the factory, and should never need to be done again.  Doing so may have the potential of making the hard drive unusable.

(and on that note, I'll leave it to the other guys with more experience here)

Best of luck,
Mike
Amiga 500: 2MB Chip|16MB Fast|30MHz 68030+68882|3.9|Indivision ECS|GVP A500HD+|Mechware card reader + 8GB CF|Cocolino|SCSI DVD-RAM
Amiga 2000: 2MB Chip|136MB Fast|50MHz 68060|3.9|Indivision ECS + GVP Spectrum|Mechware card reader + 8GB CF|AD516|X-Surf 100|RapidRoad|Cocolino|SCSI CD-RW
 Amiga videos and other misc. stuff at https://www.youtube.com/CompTechMike/videos
 

Offline Oldsmobile_Mike

Re: Amiga 1000 and supra hard drive setup
« Reply #1 on: September 02, 2003, 08:42:50 PM »
Quote

melott wrote:

But I always low-level format a SCSI drive
when installing it, I have done this on several
occasions. I like update the bad block list.



Hi,

Sorry if I'm beating a dead horse here, but shouldn't a standard format update the bad block list, as well?  Just curious.

Thanks much,
Mike
Amiga 500: 2MB Chip|16MB Fast|30MHz 68030+68882|3.9|Indivision ECS|GVP A500HD+|Mechware card reader + 8GB CF|Cocolino|SCSI DVD-RAM
Amiga 2000: 2MB Chip|136MB Fast|50MHz 68060|3.9|Indivision ECS + GVP Spectrum|Mechware card reader + 8GB CF|AD516|X-Surf 100|RapidRoad|Cocolino|SCSI CD-RW
 Amiga videos and other misc. stuff at https://www.youtube.com/CompTechMike/videos