@mpiva:
You might also need active terminators. The CyberStorm doesnt have any builtin termination and the SCSI cable has to be terminated in both ends. If your harddrives have onboard active termination it is easy - just place one harddrive in each end of the cable and activate their termination. If they dont you will have to buy separate active terminators and fit those at the ends of the cable. There are different types of active terminators - the ones with passtrough and the ones without passthrough. The ones with passthrough can be attached at the end of the cable and then plugged into a disk, but the ones without passthrough has to be plugged in a free connector at the end of the cable... so if you would be using those you would need 5 connectors on your cable (two for the terminators, one for the cyberstorm, two for the harddrives).
/Patrik
