Welcome, Guest. Please login or register.

Author Topic: santa's warp engine  (Read 1994 times)

Description:

0 Members and 1 Guest are viewing this topic.

Offline Erwin-K

  • Full Member
  • ***
  • Join Date: Feb 2002
  • Posts: 128
    • Show all replies
Re: santa's warp engine
« on: December 21, 2002, 10:30:15 PM »
sarkis,

The WarpEngine has run my A4000D at work for about seven years. Just make sure you have good circulation in your box.

For ram, use -single sided- Sims. Most, if not all, double sided  Sims are too thick to fit properly with another Sim behind them.

If you have any questions, leave me a note at Amiga.org. I have the manual and disk at work.

Best,
Bob Kennedy :hammer:
Best,

Bob Kennedy
 

Offline Erwin-K

  • Full Member
  • ***
  • Join Date: Feb 2002
  • Posts: 128
    • Show all replies
Re: santa's warp engine
« Reply #1 on: December 23, 2002, 01:42:49 AM »
Hi All,

While Quixote is happy with double sided Sims, I have heard much grumbling about them over the years. Some are probably thicher than others.

I boot my A4KD from a 4GB drive connected to the WarpEngine, the CD-Rom is also in the chain. That used to be external, but moved inside a few years back with no problems.

Too bad the company did not last long enough to get the 060 model out.

Best,
Bob Kennedy :-)
Best,

Bob Kennedy