Well ignoring my PSU project issues, i have had some success finally getting my CF-IDE to play nice and operate at decent speeds etc (PFS3 was the answer).
I've also changed Kickstart switchers to an all-in-one unit which will fit under Kippers 8MB automount Ram board I have on order (other one I have is too tall as it sits in the socket with both roms mounted on top).
New KS Switcher/ROM and CF-IDE Installed:
http://dl.dropbox.com/u/71121999/Amiga/2012-09-15%2010.21.58.jpgInstalling ClassicWB (actually works now):
http://dl.dropbox.com/u/71121999/Amiga/2012-09-15%2010.24.54.jpgOne issue i've come across, that I can replicate in WinUAE too, and is a PITA on my real miggy is with the non-automount ram board from tomthul; ClassicWB boots up perfectly without the autoaddram command in the S:startup-sequence file, but If i put the C:autoaddram command into the S:startup-sequence file I get an "intuition is trying to reset WB" error and when WB appears my icons are the wrong colour.
It doesnt seem to matter where I put the C:autoaddram command either, I still get the error, the only time I dont is if I run autoaddram after WB has finished booting with results in bugger all chip-ram left and WB is a lot slower because it's not in fast ram.
Any Ideas folks?