Welcome, Guest. Please login or register.

Author Topic: My A500 "project" pics, details, build log?  (Read 112728 times)

Description:

0 Members and 1 Guest are viewing this topic.

Offline djos

  • Hero Member
  • *****
  • Join Date: Jun 2012
  • Posts: 982
    • Show all replies
    • http://users.adam.com.au/djorlc/
Re: My A500 "project" pics, details, build log?
« Reply #134 from previous page: June 06, 2013, 01:56:00 AM »
Quote from: mrknight;736982

Btw, where did you find a TV with SCART in Australia? Thought SCART was pretty much unheard of here.


Not wrong, they are very rare here except for a small number of premium euro brands like Lowe, Grundig etc.
[SIGPIC][/SIGPIC] Amiga 1200 w/ ACA1220 16Mhz 128MB w/ RTC, 4GB CF-HDD, Roland MT-32 MIDI Synthesiser
Amiga 500 w/ KS2.05, 1Mb Chip-Ram, CF-IDE w/4MB Fast-Ram, FDD Boot Selector, HxC RevC Floppy emulator
Commodore 64 w/ 1541 Ultimate-II inc Tape Adapter, JiffyDOS, 1541 Disk Drive, 1531 Datasette, Flyer Net Modem
 

Offline djos

  • Hero Member
  • *****
  • Join Date: Jun 2012
  • Posts: 982
    • Show all replies
    • http://users.adam.com.au/djorlc/
Re: My A500 "project" pics, details, build log?
« Reply #135 on: June 07, 2013, 08:08:38 AM »
Quote from: Hattig;737021
Grundig is a premium brand in Australia?!

They're not in the UK!


yep, premium as in a product marketed to euro-snobs at over-inflated prices ... like BMW and Mercedes, B&O etc.

It's an Aussie syndrome that afflicts ppl with too much money. :crazy:
[SIGPIC][/SIGPIC] Amiga 1200 w/ ACA1220 16Mhz 128MB w/ RTC, 4GB CF-HDD, Roland MT-32 MIDI Synthesiser
Amiga 500 w/ KS2.05, 1Mb Chip-Ram, CF-IDE w/4MB Fast-Ram, FDD Boot Selector, HxC RevC Floppy emulator
Commodore 64 w/ 1541 Ultimate-II inc Tape Adapter, JiffyDOS, 1541 Disk Drive, 1531 Datasette, Flyer Net Modem
 

Offline djos

  • Hero Member
  • *****
  • Join Date: Jun 2012
  • Posts: 982
    • Show all replies
    • http://users.adam.com.au/djorlc/
Re: My A500 "project" pics, details, build log?
« Reply #136 on: June 08, 2013, 01:48:13 AM »
I got my Amiga-scart cable from amigakit and it produces very good results.
[SIGPIC][/SIGPIC] Amiga 1200 w/ ACA1220 16Mhz 128MB w/ RTC, 4GB CF-HDD, Roland MT-32 MIDI Synthesiser
Amiga 500 w/ KS2.05, 1Mb Chip-Ram, CF-IDE w/4MB Fast-Ram, FDD Boot Selector, HxC RevC Floppy emulator
Commodore 64 w/ 1541 Ultimate-II inc Tape Adapter, JiffyDOS, 1541 Disk Drive, 1531 Datasette, Flyer Net Modem
 

Offline djos

  • Hero Member
  • *****
  • Join Date: Jun 2012
  • Posts: 982
    • Show all replies
    • http://users.adam.com.au/djorlc/
Re: My A500 "project" pics, details, build log?
« Reply #137 on: June 08, 2013, 02:43:37 AM »
Same here, im a Mazda man and have a 2010 6 wagon & the last of the Astina's from 2002 - brilliant cars to drive and never have faults + servicing is dramatically cheaper than the European cars!
[SIGPIC][/SIGPIC] Amiga 1200 w/ ACA1220 16Mhz 128MB w/ RTC, 4GB CF-HDD, Roland MT-32 MIDI Synthesiser
Amiga 500 w/ KS2.05, 1Mb Chip-Ram, CF-IDE w/4MB Fast-Ram, FDD Boot Selector, HxC RevC Floppy emulator
Commodore 64 w/ 1541 Ultimate-II inc Tape Adapter, JiffyDOS, 1541 Disk Drive, 1531 Datasette, Flyer Net Modem
 

Offline djos

  • Hero Member
  • *****
  • Join Date: Jun 2012
  • Posts: 982
    • Show all replies
    • http://users.adam.com.au/djorlc/
Re: My A500 "project" pics, details, build log?
« Reply #138 on: June 11, 2013, 12:48:25 AM »
Quote from: Lurch;737191
Would buy in the following order, although Hyundai is starting to creep in there.

Toyota -> Nissan -> Honda -> Mazda.

I'd have to disagree with your order there, there is a reason why Mazda is the leading 100% imported brand in Australia, it's because their cars are high quality, have everything that opens and shuts and they are priced well.

Toyota produce the occasional nice sports car but the rest of their catalogue is boring as and their styling is a bit naff too (new corrolla exempted). their biggest sin is low entry level pricing that includes next to no niceties and if you want those extras you have to hand over more cash for the next model up.

Back in 2002 when I was shopping for my first ever new car it came down to the 323 Astina and Corrolla - the corrolla was technically inferior in every dept except engine power (extra 5kW's), it had a torsion beam rear end, cable-link clutch, cable-link manual gear shift and very lazy gearing + if you wanted power rear windows you had to buy the mid range model as you could only get power fronts on the base model.

Compare that with the Mazda 323 Astina which had a hydraulic clutch, mechanical-link gear shifter and fully independent multi-link rear end and both were almost identically priced. I bought the Astina and was able to option it up with power everything, 6 cd-changer, cruise control and alloy wheels for the same price as the mid-range corrolla and got a better car for my money.

these days Mazda is still my #1 pref (just bought a late '10 6 Wagon still under new car warranty) but i'd buy a new Hyundai before i'd buy a Toyota now - they look great, handle well, are priced well and reliability is now excellent.
« Last Edit: June 11, 2013, 12:50:35 AM by djos »
[SIGPIC][/SIGPIC] Amiga 1200 w/ ACA1220 16Mhz 128MB w/ RTC, 4GB CF-HDD, Roland MT-32 MIDI Synthesiser
Amiga 500 w/ KS2.05, 1Mb Chip-Ram, CF-IDE w/4MB Fast-Ram, FDD Boot Selector, HxC RevC Floppy emulator
Commodore 64 w/ 1541 Ultimate-II inc Tape Adapter, JiffyDOS, 1541 Disk Drive, 1531 Datasette, Flyer Net Modem
 

Offline djos

  • Hero Member
  • *****
  • Join Date: Jun 2012
  • Posts: 982
    • Show all replies
    • http://users.adam.com.au/djorlc/
Re: My A500 "project" pics, details, build log?
« Reply #139 on: June 22, 2013, 02:03:29 PM »
Wow that some serious porting!!!

If you buy your own house you could install infinite baffle subs instead! :D
[SIGPIC][/SIGPIC] Amiga 1200 w/ ACA1220 16Mhz 128MB w/ RTC, 4GB CF-HDD, Roland MT-32 MIDI Synthesiser
Amiga 500 w/ KS2.05, 1Mb Chip-Ram, CF-IDE w/4MB Fast-Ram, FDD Boot Selector, HxC RevC Floppy emulator
Commodore 64 w/ 1541 Ultimate-II inc Tape Adapter, JiffyDOS, 1541 Disk Drive, 1531 Datasette, Flyer Net Modem
 

Offline djos

  • Hero Member
  • *****
  • Join Date: Jun 2012
  • Posts: 982
    • Show all replies
    • http://users.adam.com.au/djorlc/
Re: My A500 "project" pics, details, build log?
« Reply #140 on: June 23, 2013, 12:20:33 AM »
Did you bond multiple layers of mdf together then cut it into the curve?
[SIGPIC][/SIGPIC] Amiga 1200 w/ ACA1220 16Mhz 128MB w/ RTC, 4GB CF-HDD, Roland MT-32 MIDI Synthesiser
Amiga 500 w/ KS2.05, 1Mb Chip-Ram, CF-IDE w/4MB Fast-Ram, FDD Boot Selector, HxC RevC Floppy emulator
Commodore 64 w/ 1541 Ultimate-II inc Tape Adapter, JiffyDOS, 1541 Disk Drive, 1531 Datasette, Flyer Net Modem
 

Offline djos

  • Hero Member
  • *****
  • Join Date: Jun 2012
  • Posts: 982
    • Show all replies
    • http://users.adam.com.au/djorlc/
Re: My A500 "project" pics, details, build log?
« Reply #141 on: June 23, 2013, 12:55:49 AM »
Wow, that's a neat solution!
[SIGPIC][/SIGPIC] Amiga 1200 w/ ACA1220 16Mhz 128MB w/ RTC, 4GB CF-HDD, Roland MT-32 MIDI Synthesiser
Amiga 500 w/ KS2.05, 1Mb Chip-Ram, CF-IDE w/4MB Fast-Ram, FDD Boot Selector, HxC RevC Floppy emulator
Commodore 64 w/ 1541 Ultimate-II inc Tape Adapter, JiffyDOS, 1541 Disk Drive, 1531 Datasette, Flyer Net Modem
 

Offline djos

  • Hero Member
  • *****
  • Join Date: Jun 2012
  • Posts: 982
    • Show all replies
    • http://users.adam.com.au/djorlc/
Re: My A500 "project" pics, details, build log?
« Reply #142 on: June 27, 2013, 09:47:04 AM »
Quote from: AmmoJammo;738981
The RGB scart to YUV adapter arrived.... then I couldn't find the scart cable :(

Anyhoo! pics should follow soon.... this tv has some interesting results, but once again, I need it to compare scart to yuv, and svideo ;)
Ok so we need to know the following:

A/ does it convert 15khz
B/ does it stretch 4:3 to 16:9 (hate converters that do this)
C/ does it handle high-res laced modes like those produced by the raw controller speed test program
D/ does it soften moving objects or backgrounds
E/ does it display fine patterns properly

That should do for now :D
[SIGPIC][/SIGPIC] Amiga 1200 w/ ACA1220 16Mhz 128MB w/ RTC, 4GB CF-HDD, Roland MT-32 MIDI Synthesiser
Amiga 500 w/ KS2.05, 1Mb Chip-Ram, CF-IDE w/4MB Fast-Ram, FDD Boot Selector, HxC RevC Floppy emulator
Commodore 64 w/ 1541 Ultimate-II inc Tape Adapter, JiffyDOS, 1541 Disk Drive, 1531 Datasette, Flyer Net Modem
 

Offline djos

  • Hero Member
  • *****
  • Join Date: Jun 2012
  • Posts: 982
    • Show all replies
    • http://users.adam.com.au/djorlc/
Re: My A500 "project" pics, details, build log?
« Reply #143 on: June 29, 2013, 07:54:42 AM »
1= gbs82xx
3= rgb-yuv
2= svideo

?
[SIGPIC][/SIGPIC] Amiga 1200 w/ ACA1220 16Mhz 128MB w/ RTC, 4GB CF-HDD, Roland MT-32 MIDI Synthesiser
Amiga 500 w/ KS2.05, 1Mb Chip-Ram, CF-IDE w/4MB Fast-Ram, FDD Boot Selector, HxC RevC Floppy emulator
Commodore 64 w/ 1541 Ultimate-II inc Tape Adapter, JiffyDOS, 1541 Disk Drive, 1531 Datasette, Flyer Net Modem
 

Offline djos

  • Hero Member
  • *****
  • Join Date: Jun 2012
  • Posts: 982
    • Show all replies
    • http://users.adam.com.au/djorlc/
Re: My A500 "project" pics, details, build log?
« Reply #144 on: June 29, 2013, 08:32:29 AM »
Ok so which is which?
[SIGPIC][/SIGPIC] Amiga 1200 w/ ACA1220 16Mhz 128MB w/ RTC, 4GB CF-HDD, Roland MT-32 MIDI Synthesiser
Amiga 500 w/ KS2.05, 1Mb Chip-Ram, CF-IDE w/4MB Fast-Ram, FDD Boot Selector, HxC RevC Floppy emulator
Commodore 64 w/ 1541 Ultimate-II inc Tape Adapter, JiffyDOS, 1541 Disk Drive, 1531 Datasette, Flyer Net Modem
 

Offline djos

  • Hero Member
  • *****
  • Join Date: Jun 2012
  • Posts: 982
    • Show all replies
    • http://users.adam.com.au/djorlc/
Re: My A500 "project" pics, details, build log?
« Reply #145 on: July 01, 2013, 03:54:32 AM »
Quote from: AmmoJammo;739194
Bit of YUV, GBS, svideo ;)

not resized this time.... but, I dont think it looks any better...

The GBS actually seems to look somewhat better on this TV ;)

All my cables are very low quality though.

1. http://imageshack.us/a/img5/1278/6rcj.jpg
2. http://imageshack.us/a/img42/1039/fkzv.jpg
3. http://imageshack.us/a/img27/6322/y7hp.jpg


ok imo the GBS is number 3 (banding is the giveaway) and there seems to be slightly more colour info in number 1 so im calling that YUV and number 2 is s-video which still looks quite good too.
[SIGPIC][/SIGPIC] Amiga 1200 w/ ACA1220 16Mhz 128MB w/ RTC, 4GB CF-HDD, Roland MT-32 MIDI Synthesiser
Amiga 500 w/ KS2.05, 1Mb Chip-Ram, CF-IDE w/4MB Fast-Ram, FDD Boot Selector, HxC RevC Floppy emulator
Commodore 64 w/ 1541 Ultimate-II inc Tape Adapter, JiffyDOS, 1541 Disk Drive, 1531 Datasette, Flyer Net Modem
 

Offline djos

  • Hero Member
  • *****
  • Join Date: Jun 2012
  • Posts: 982
    • Show all replies
    • http://users.adam.com.au/djorlc/
Re: My A500 "project" pics, details, build log?
« Reply #146 on: July 01, 2013, 08:41:10 AM »
Nice, what about the stretch, does it leave 4:3 alone or does it stretch to 16:9 to annoy us aspect ratio purists?
[SIGPIC][/SIGPIC] Amiga 1200 w/ ACA1220 16Mhz 128MB w/ RTC, 4GB CF-HDD, Roland MT-32 MIDI Synthesiser
Amiga 500 w/ KS2.05, 1Mb Chip-Ram, CF-IDE w/4MB Fast-Ram, FDD Boot Selector, HxC RevC Floppy emulator
Commodore 64 w/ 1541 Ultimate-II inc Tape Adapter, JiffyDOS, 1541 Disk Drive, 1531 Datasette, Flyer Net Modem
 

Offline djos

  • Hero Member
  • *****
  • Join Date: Jun 2012
  • Posts: 982
    • Show all replies
    • http://users.adam.com.au/djorlc/
Re: My A500 "project" pics, details, build log?
« Reply #147 on: July 01, 2013, 10:35:38 PM »
Quote from: AmmoJammo;739508
The tv scales it.


I'm not sure if you understand the question correctly, is the yuv converter outputting the 4:3 video in a 4:3 frame or does it stretch the content into a 16:9 frame?
[SIGPIC][/SIGPIC] Amiga 1200 w/ ACA1220 16Mhz 128MB w/ RTC, 4GB CF-HDD, Roland MT-32 MIDI Synthesiser
Amiga 500 w/ KS2.05, 1Mb Chip-Ram, CF-IDE w/4MB Fast-Ram, FDD Boot Selector, HxC RevC Floppy emulator
Commodore 64 w/ 1541 Ultimate-II inc Tape Adapter, JiffyDOS, 1541 Disk Drive, 1531 Datasette, Flyer Net Modem
 

Offline djos

  • Hero Member
  • *****
  • Join Date: Jun 2012
  • Posts: 982
    • Show all replies
    • http://users.adam.com.au/djorlc/
Re: My A500 "project" pics, details, build log?
« Reply #148 on: July 01, 2013, 11:09:17 PM »
Quote from: AmmoJammo;739512
The tv stretches it.


So the TV is telling you it's receiving 576i (or 576p) non-anamorphic 4:3?
[SIGPIC][/SIGPIC] Amiga 1200 w/ ACA1220 16Mhz 128MB w/ RTC, 4GB CF-HDD, Roland MT-32 MIDI Synthesiser
Amiga 500 w/ KS2.05, 1Mb Chip-Ram, CF-IDE w/4MB Fast-Ram, FDD Boot Selector, HxC RevC Floppy emulator
Commodore 64 w/ 1541 Ultimate-II inc Tape Adapter, JiffyDOS, 1541 Disk Drive, 1531 Datasette, Flyer Net Modem
 

Offline djos

  • Hero Member
  • *****
  • Join Date: Jun 2012
  • Posts: 982
    • Show all replies
    • http://users.adam.com.au/djorlc/
Re: My A500 "project" pics, details, build log?
« Reply #149 on: July 01, 2013, 11:16:17 PM »
Quote from: Oldsmobile_Mike;739511
Why would the YUV converter stretch it?  If it is it's a piece of junk and should be replaced with an Indivision (haha, yes, my biased opinion), but in any case nearly any good TV has an option to stretch 4:3 to 16:9 or not.  It's an option in the menu on the TV.  Same thing, if your TV doesn't have that option junk it for a better model.  Heh.  ;)

If its a scaler too then it might stretch it to fill a 16:9 frame like the rgb-Hdmi converter does - it slightly more relevant to the 720p/1080i/p modes as they are native 16:9 modes.

SD resolutions, 480/576, are normally 4:3 but DVDs and Sdtv use a trick called anamorphic mode to produce a 16:9 picture from a 4:3 resolution and there is a flag in the Component video standard to automatically detect anamorphic mode and auto stretch the content to 16:9 if its present.
[SIGPIC][/SIGPIC] Amiga 1200 w/ ACA1220 16Mhz 128MB w/ RTC, 4GB CF-HDD, Roland MT-32 MIDI Synthesiser
Amiga 500 w/ KS2.05, 1Mb Chip-Ram, CF-IDE w/4MB Fast-Ram, FDD Boot Selector, HxC RevC Floppy emulator
Commodore 64 w/ 1541 Ultimate-II inc Tape Adapter, JiffyDOS, 1541 Disk Drive, 1531 Datasette, Flyer Net Modem