Welcome, Guest. Please login or register.
Forums
« previous next »
Pages: [1]   Go Down

Author Topic: Help a newbie install Catweasel Z-11 MK2?  (Read 1140 times)

Description:

0 Members and 1 Guest are viewing this topic.

Offline jammarobTopic starter

  • Newbie
  • *
  • Join Date: Jun 2012
  • Posts: 34
    • Show all replies
Help a newbie install Catweasel Z-11 MK2?
« on: October 01, 2013, 04:09:34 AM »
Hey guys,

I am a bit lost on what I need to install this Catweasel Z-11 MK2. I read something about patched kickstart ROMs that you can burn that make configuration a snap?

I am not familiar with this process (Been a long-time A500 user, but never had an Amiga with a hard disk), and any help would be appreciated!
Logged
 

Offline jammarobTopic starter

  • Newbie
  • *
  • Join Date: Jun 2012
  • Posts: 34
    • Show all replies
Re: Help a newbie install Catweasel Z-11 MK2?
« Reply #1 on: October 01, 2013, 04:23:37 AM »
I should mention, this is for an Amiga 3000. This board was working (and booting to CF) before I had to pull the battery.
Logged
 

Offline jammarobTopic starter

  • Newbie
  • *
  • Join Date: Jun 2012
  • Posts: 34
    • Show all replies
Re: Help a newbie install Catweasel Z-11 MK2?
« Reply #2 on: October 02, 2013, 02:07:19 PM »
No, definitely the Z-II with IDE connectors. Unfortunately, the CF card no longer shows up as a bootable device (I only see DF0).

The card is detected and shows as functioning.

I'll give another drive a try and see what happens.
Logged
 
Pages: [1]   Go Up
« previous next »