A3000D: Setting up Catweasel MK2

[jammarob]

Howdy!

I was hoping some of you might be able to provide some insight and assistance setting up my Catweasel IDE controller.

When I bought this A3000 a few years ago, it booted to a 4 GB CF card (2 x 2GB partitions) with Workbench 3.1.

Recently, the video stopped working. I disassembled the machine, and while the battery had long been replaced, the residual acid had corroded the Denise socket. I pulled the socket and installed a new one.

Unfortunately, I had to remove the battery. I assume this cleared any settings related to the CF setup, but I am not familiar enough to get it working again.

I appreciate any help Hopefully it is something simple.

[jammarob]

I should mention that "DF0" shows up in the boot menu as enabled, but it still won't boot to the CF card.

[jammarob]

It could be an MK3 I suppose.

[jammarob]

Is my A3000 toast?

[jammarob]

I do see an expansion card listed, and it is the only card installed at the moment. It does show it as operational.

So it's possible I might need to reload my CF card, or try a different one?