Installation of Amigakit's SCSI to Micro SD card adapter

[WeiXing3D]

As stated before, I will be receiving an Amiga 3000 in the following days.

The unit is coming originally configured so that Workbench is the 49 MB Quantum SCSI, Work is the Maxtor internal SCSI mounted next to DF0: Internal Floppy and "HardDisk" is an external SCSI - Quantum mounted with Imation CD-R.

So I need help in figuring which will be the best way to install and configured. The idea is to make the SCSI mounted Micro SD card, the bootable unit, and to clone the configuration and information of the original 49MB in there.

I bought a 36" 50-pin SCSI 3-Connector Internal Flat Dual Ribbon Cable - Up To 2 Drives, thinking that it may be needed.

Could somebody please guide me through the process or point me in the direction I need to look to find this information?

I will create a separate thread to ask questions regarding a fresh installation of WB 3.9, to have a spare sd card ready.

[WeiXing3D]

@Oldsmobile_Mike
I corrected the typo. Thanks.

Thank you as well for the links on how to prepare and install WB 3.9 in a card. Do you know how to do the cloning of the internal HDD to the sd card, once I get it connected?

[WeiXing3D]

I forgot to ask: What is the maximum size (capacity) of micro sd card that I could use as an Amiga HDD?

I have a brand new micro sd card, 64 GB in size, screaming "pick me, pick me."

[WeiXing3D]

I used a 16 gig card and works great. Don't for get to set you sd card size with the pc uitl .  After I set up the sd card I just set my partitions and quick formatted the drives and used opus and directly copied everything over from one drive to the other. And of course checked off that boot partition.. I think there is a thread somewhere here with pics and how I mounted it.. Maybe on AEB too.

lost

Can this be done in WinUAE and have the sd card ready for the actual installation in A3000?

[WeiXing3D]

Assuming the Amiga sees it as a regular hard drive, your limits are the same as for any other Amiga hard drive.  Typically 4GB, 8GB, or 127GB, depending on a whole bunch of things like your controller, OS version, file system (FFS, PFS, SFS, etc.), and a slew of various other things.

I think there's a few people who've hacked their Amiga's to support 2TB drives, it all just depends how much work you want to put into it.  

So what format would be recommended for a 6t4GB card, FFS, PFS or SFS)? I believe FFS only works for cards of up to 4GB, is this right?

[WeiXing3D]

Guys. Thank you all for your responses. I am reading them carefully.

If I am understanding this correctly, I'm hearing from a similar post in EAB that there is a limitation as to the size of micros SD card that I can use, and that limit is 2 GB:

"You also need to take into account the size of the SD card and how much you want to use for the HD. The SCSI2SD comes preset at 2gb. Obviously if your SD card is smaller than that then you need to alter the size to match. Bigger than 2gb is not a problem unless you want to use more than 2gb, if so,then you will have to alter the size to match what you want."

So, is this correct, or I can still use a larger size card?

[WeiXing3D]

I don't own one so can't say for certain, but I think the way the device works is, it defaults to a 2GB card, but if you want to use a larger card you just need to plug the reader into a PC (via USB) and use it's settings tool to tell it you're going to be using a larger card.  That's how I think it operates, anyway.  

@Oldsmobile_Mike
Thank you for your help.

I also got a similar replied from Arnie at EAB who shared this:
You need a micro usb cable and the software.

http://www.codesrc.com/files/scsi2sd/v4.6/

Connect the SCSI2SD card to the PC and use scsi2sd-util.exe to alter the settings.

The other exe monitor.exe just checks that the SCSI2SD card is connected and working.

If you feel comfortable doing it then the firmware needs upgrading to 4.6 (It may already be upgraded, but mine came with 4.4)

Well, I ran the firmware upgrade (now v4.6), and the monitor.exe routine says that everything is fine, but I can't make the adapter to save the 4GB new size configuration. It reverts to the default 2GB. See picture.

Any ideas? I'm guessing is because the actual space in this brand new 4GB is not 4GB, but 3.xGB.

[WeiXing3D]

thats right.. Just connect the card to a pc via usb and set the size to what the sd card is. It got me at first too cause all it saw was 2 gig on a 16 gig card and i was like what the f .. . but reading into it i downloaded the util and connected it and set the size to what i was using..

Well, precisely, I am selecting 4 GB for device 1 from the utilities.exe, but it is not saving the new size and it goes back to 2GB.

Why is this? What else do In need to do besides clicking Save to Device?:hammer:

[WeiXing3D]

Check your cable? some are just for charging not data exchange...

Cable is good since I used it to update the firmware