Welcome, Guest. Please login or register.
Forums
« previous next »
Pages: [1]   Go Down

Author Topic: RGB to VGA Adapter + GBS 8200  (Read 4358 times)

Description:

0 Members and 1 Guest are viewing this topic.

Offline AmmoJammo

  • Hero Member
  • *****
  • Join Date: May 2012
  • Posts: 726
    • Show all replies
Re: RGB to VGA Adapter + GBS 8200
« on: September 13, 2015, 10:31:49 PM »
The GBS runs off 5 volt, not 10.

This shouldn't cause the A500 not to boot up, unless the VGA adapter you have (which has a small circuit in it) is connecting the "5volts" from the GBS board, back to the A500's video port.
Logged
 

Offline AmmoJammo

  • Hero Member
  • *****
  • Join Date: May 2012
  • Posts: 726
    • Show all replies
Re: RGB to VGA Adapter + GBS 8200
« Reply #1 on: September 14, 2015, 08:03:25 AM »
got a picture of the cable you made up?

so with the GBS plugged in to the Amiga, either via the vga connector, or the posts on the board, the Amiga doesn't boot up?
Logged
 

Offline AmmoJammo

  • Hero Member
  • *****
  • Join Date: May 2012
  • Posts: 726
    • Show all replies
Re: RGB to VGA Adapter + GBS 8200
« Reply #2 on: September 21, 2015, 11:17:06 AM »
Without seeing pictures of where the wires are soldered, I can't really comment.
Logged
 

Offline AmmoJammo

  • Hero Member
  • *****
  • Join Date: May 2012
  • Posts: 726
    • Show all replies
Re: RGB to VGA Adapter + GBS 8200
« Reply #3 on: December 06, 2015, 07:50:30 PM »
Quote from: mechy;799883
Ian Steadman has done some work on this, you might take a look at this.
You definately want a 5v power supply. they say it needs 2 amps but i think steady found it didnt need anywhere near 2 amps.

https://ianstedman.wordpress.com/gbs-82xx-experiments/

It needs about 500ma.
Logged
 
Pages: [1]   Go Up
« previous next »