68030 not running at 25Mhz

[AmmoJammo]

ah, so that was new crystal, and new CPU?

interesting...

[AmmoJammo]

try removing the FPU?

[AmmoJammo]

also, do you have your 68000 in the accelerator? maybe try with/without that?

[AmmoJammo]

and while your amiga is apart (like it was ever together) could you please take a good quality, highish resolution pic of the accelerator? just from the top, straight down

[AmmoJammo]

It wont result in the cpu running at 13.4mhz though :/ what does it do it "fall back" mode?

[AmmoJammo]

The 68030 on this card always runs at 28.5 Mhz. The crystal is for the FPU only.

is it set by the original crystal on the motherboard?

[AmmoJammo]

Sysinfo has no idea what clock speed your CPU is running at. It just makes a guess based on some timed loops which run at different speed on different CPUs... It probably isn't accurate on anything other than a 68000...

AIBB/sysspeed all state 13 or 14.5Mhz so something weird going on here.

25Mhz Crystal
25Mhz 68030
25Mhz FPU

Maybe something software wise :-/ 68030.library?

even if it is reporting the speed wrong, it's still benchmarking as a 13Mhz CPU...