No Video-1084s -d and amiga 600

[petercli]

Hello,
I have a amiga 600 (PAL).

I got a new monitor ( 1084s -d)

Using the rgb cable, I don't have any video at all. The screen is totally dark.
On the monitor, the red power light is on .

I tried Digital and analog.
Any suggestions ?
Thanks,Peter

[petercli]

OK - I got video!!  There is a switch for Comp/Set/RGP  - it worked after I set it to  RGB  .
 
 Now I have a different issue - the screen is shifted up, leaving a black bar on the bottom and chopping off part of the top menu bar.
 
 There is a adjustment for  v-height  on the back , but I might need a special tool to reach it.

 
Any suggestions?

[petercli]

sorry- I changed my previous post after you read it.
 ----------------------------------------
 OK - I got video!! There is a switch for Comp/Set/RGP - it worked after I set it to RGB .

Now I have a different issue - the screen is shifted up, leaving a black bar on the bottom and chopping off part of the top menu bar.

There is a adjustment for v-height on the back , but I might need a special tool to reach it ?

[petercli]

on the back side, I see a hole labeled 'v.height' , but unfortunately the turning wheel inside the hole is pointing at a slight angle so I can't easily make the adjustment(assuming I have the correct plastic screwdriver)

I see 2 screws - I wonder if the back plate can be removed?

Here is a picture:
https://onedrive.live.com/redir?resid=ca964390081d95ab!6352&authkey=!ABDvlB70w1tH_lo&v=3&ithint=photo%2cjpg

(I might sound overly cautious, but I know monitors have high voltage)
Thanks,Peter

[petercli]

MoTrucker
 Thank you for your generous offer of the free monitor  :-)
 
 I sent you a private message.
 
 (I delayed replying, so I understand if it is already given out)  
 
 Regards,Peter