Welcome, Guest. Please login or register.
Forums
« previous next »
Pages: [1]   Go Down

Author Topic: Loose dvi port on AGA mk2cr  (Read 1160 times)

Description:

0 Members and 1 Guest are viewing this topic.

Offline petercliTopic starter

  • Jr. Member
  • **
  • Join Date: May 2012
  • Posts: 70
    • Show all replies
Loose dvi port on AGA mk2cr
« on: July 14, 2014, 12:16:42 PM »
I installed a AGA mk2cr into my A1200. The DVI connector flops around loose because the  cable doesn't have the hole that allows you  to screw the end to the A1200 case , like in this video  https://www.youtube.com/watch?v=fbteWszZa4Q  . Is there a face place I can get to hold the connector in place?
Logged
 

Offline petercliTopic starter

  • Jr. Member
  • **
  • Join Date: May 2012
  • Posts: 70
    • Show all replies
Re: Loose dvi port on AGA mk2cr
« Reply #1 on: July 16, 2014, 03:04:10 PM »
Dan ,  my  a1200 case already has mounting hole. The problem is that Indivision  took away the hole in  the DVI cable  . If you watch the last 30 seconds of the video I mentioned above, you'll see that the old DVI cable has the hole.
Logged
 
Pages: [1]   Go Up
« previous next »