FPGA Replay Board

[Faranheit]

Hi all

After Mike has given his agreement yesterday for an  exact point, you can now see the FPGA Arcade / Replay board on our  webshop

All can be found :
- HERE for a complete system,
- HERE for the board itself,
- HERE for the accessories.

In the board page, you'll be able to see a little video showing it in action (with the old firmware for the moment).
When we receive the new firmware, we'll post a new video

Thanks to Mike and Jakub for their awesome work !
Lionel 'Braver' and Laurent 'Faranheit'
Amedia Computer France

[Faranheit]

Hi Kokos,

If you have not requested it with the board, it will not be shipped with the board.

Thanks, Lionel 'Braver' and Laurent 'Faranheit'
Amedia Computer France

[Faranheit]

@Sysop:
1. The FPGA Arcade board can handle 2 HDF hardfiles of 3,99GB maximum size (FAT32 limitations),
2. Kickstart file must copied at the root of the SD Card and you can install at least Workbench 3.5 (standard or Classic WB 3.5) on any of the 2 HDF hardfiles using the the ADF virtual floppies of the Workbench or WinUAE,
3. The FPGA Arcade board can handle up to 4 virtual drives at 2 differents read speed.

You can have a look at our video showing it in action on our website HERE with the 'Watch Video' button or HERE with the 'Watch Video' button.

Prices INCLUDES french VAT for informations.

@Kamelito: DVI / VGA adapter (not cable) works fine with the FPGA Arcade board and we have succesfully tested Rise of the Robots, Hybris, Canon Fodder 1 / 2, Lemmings, California Games, Super Stardust .... on the old firmware, and also Classic Workbench 3.5, Dopus 4.x, DPaintIV, Delitracker, and overall WHDLoad games

Thanks, Lionel 'Braver' et Laurent 'Faranheit'
Amedia Computer France

[Faranheit]

@Haywirepc:
You can go THERE or THERE.

Prices include french VAT (which can be removed depending on your coutry) and we can send products all over the world.

You can also contact us through mail at contact@amedia-computer.com or laurent@amedia-computer.com

We accept paypal, credit card or bank transfert for informations

And we have just also received a new stock of Minimig's boards and accessories :
- Complete Super Minimig V3,
- 4MB Minimig's board,
- ARM Controller,
- Crystal case,
- VGA to Scart cable.

Last thing : for informations, we have Mike's agreement for reselling his awesome board and on the product page, there is a link for a little video showing it in action

Thanks, Lionel 'Braver' and Laurent 'Faranheit'
Amedia Computer France

[Faranheit]

Hi all

As Mike said it, here, at Amedia Computer France, we are an official distributor for his board, accessories and complete configurations (case can be changed in order to suit your desire), as well as for other Amiga products.

We have made a special effort for translating our website in english for non french users and we can provide products all around the world with Fedex or French post for example.

We do NOT ONLY provide these wonderful boards and accessories to french people, we have yet many customers from all Europe, Canada, North Korea ....

So, if you want to pre-order this product or any other Amiga product you see on our website, don't hesitate and send us a mail at contact@amedia-computer.com or laurent@amedia-computer.com, we answer in the day maximum, even in the 2 following hours in general

Thanks in advance, Lionel 'Braver' and Laurent 'Faranheit'
Amedia Computer France

[Faranheit]

@Everblue :
HERE for example

Thanks, Lionel 'Braver' et Laurent 'Faranheit'
Amedia Computer France

[Faranheit]

@Everblue : Thanks

Thanks, Lionel 'Braver' et Laurent 'Faranheit'
Amedia Computer France

[Faranheit]

Hi
 
We use a 32GB SDHC Card for more than 1,5 year on the FPGA Arcade board, and there is no problem with it.
 
Thanks, Laurent aka Faranheit

[Faranheit]

@All:

You can still place your pre-order by sending us a mail at laurent@amedia-computer.com or contact@amedia-computer.com

Many boards are yet reserved, so don't wait to much if you want it before the end of the year

You  can have a look at our webshop for prices (all prices include the  french VAT for informations), we can send package whole over the world  

Thanks to Mike for his hard work finishing a usable version of the new firmware and core

Laurent aka Faranheit
Amedia Computer France

[Faranheit]

Hi Mr Bug

Since Norway is not yet in the European Community, effectively, you can pre-order without VAT at our shop but you'll certainly have to pay the norvegian VAT when it comes in the country.

Thanks, Laurent aka Faranheit

[Faranheit]

Hi Roc,

If you would have placed your order at our webshop, you would not have waited 3 weeks for getting your Mist board since we have in stock

The big difference between Mist and FPGA Arcade baord is that the second one has the AGA support, is easier for integration in any Mini ITX / Micro ATX and ATX case and also has more memory available.

Later (when the new firmware and core are ready), it will integrate RTG graphics support too

Thanks, Laurent aka Faranheit
Amedia Computer France
Site : http://amiga.amedia-computer.com
Thanks

[Faranheit]

Hi,

Mike is hardly working on the new core in order to send the boards quickly now.

The boards are available but not usable without the new core.

As soon as we get the new core and test it, we'll warn all pre-orderers

Thanks, Lionel and Laurent
Amedia Computer France

[Faranheit]

@AmigaClassicRule:

The FPGA Arcade board IS the FPGA Replay board

The two names are for the same board

Mike is hardly working on debugging the new Amiga core since he came back home.

Thanks, Laurent aka Faranheit
Amedia Computer France
New : you can now choose english or french language on our webshop with the flags on the top right corner

[Faranheit]

Oups, yes

Sorry for the bad english

Yes, Mike is working very hard on debugging the new Amiga core

Thanks, Laurent aka Faranheit
Amedia Computer France

[Faranheit]

Hi all there

There is some great update about the boards from today !

First : Mike is working harder and harder in fixing games like SlamTilt or Pinball Illusions, AGA s working since a long time on the boards.

Second : the boards are quicker than the Mist boards, especially at startup.

After that, yes, it has took many more time than Mike has expected, but don't forget it's very hard system to reproduce (Amiga part) and he has rewritten his core from scratch since the last 2 years, so, his code his optimized

At the end, the boards are coming from now slowly to our shop and also to Jim Drew.

For informations, we are the official reseller for whole Europe (with Mike's agreement since many times) and Jim is  the official one for the U.S..

The main purpose for Mike is sending a fully functionnal board, not a beta one which could have some instability problems for example, and even if it takes more time than expected, I think it's a good choice.

All is coming this year (30 year's Amiga ??).

Thanks to Mike for his awesome work !

Laurent - Amedia Computer
All Amiga products HERE
English flag on the top right corner of the site

[Faranheit]

Hi

For the moment, there are some few prototypes for the daughter board.

But the priority is on delivering as many boards as possible in the following two months, fixing as many bugs as possibles (in the core and firmware).

So, for the moment, we can't say more at this point.

Thanks, Laurent
Amedia Computer
All Amiga Products are HERE.
English flag is on the top right corner of the site