Welcome, Guest. Please login or register.

Author Topic: silly question about 68060 CPU  (Read 4857 times)

Description:

0 Members and 1 Guest are viewing this topic.

Offline Brian

  • Hero Member
  • *****
  • Join Date: Mar 2003
  • Posts: 1604
    • Show all replies
    • http://www.syntaxsociety.se
Re: silly question about 68060 CPU
« on: November 04, 2003, 08:44:57 AM »
Don't forget the crystal, a 040 runs on half the speed of the crystal... if you got a 040/40 and just swap in the 060 for the 040 it will run at 80Mhz and probably fry on you right there and then. :-o

Offline Brian

  • Hero Member
  • *****
  • Join Date: Mar 2003
  • Posts: 1604
    • Show all replies
    • http://www.syntaxsociety.se
Re: silly question about 68060 CPU
« Reply #1 on: November 04, 2003, 10:04:48 PM »
I got a DCE Blizzard 1260 at 50Mhz and it runs fairly hot without cooling. Nothing like the 040 though but at the time a 060 is as hot as a 040 it's probably fried and gone so I would be carefull with that if I where you.

I got a desctop with extra feets and a fan just to be safe.. will probably overclock it slightly (55Mhz or so as this system is extremly stable). As with all overclocking... better to be safe that sorry... get some cooling on that chip! :-D

Offline Brian

  • Hero Member
  • *****
  • Join Date: Mar 2003
  • Posts: 1604
    • Show all replies
    • http://www.syntaxsociety.se
Re: silly question about 68060 CPU
« Reply #2 on: November 05, 2003, 08:47:46 AM »
060 doesn't exist in 25 or 40Mhz versions, just 50 and above. At 50Mhz the 060 is a bit over twice the speed of a 040/40 (and the FPU is about 2.5 times faster). 060 at 66Mhz is about 3 times faster than 040/40 (and FPU about 3.5 times faster). :-D