Welcome, Guest. Please login or register.

Author Topic: Novice Amiga user  (Read 3784 times)

Description:

0 Members and 2 Guests are viewing this topic.

Offline Matt_H

Re: Novice Amiga user
« on: May 03, 2015, 05:00:51 PM »
Come on, guys, joking aside, this isn't a very helpful way to introduce a new user to the community - especially one who's actually using an Amiga in a professional setting!



@ Aristotle

Welcome! Let us know what sort of issues you're experiencing and we might be able to help. Depending on how comfortable you are with electronics, there may be a few things you can service yourself.
 

Offline Matt_H

Re: Novice Amiga user
« Reply #1 on: May 03, 2015, 08:14:03 PM »
EAB is global. There are a couple of other Amiga users in Texas who I think are members both here and there, but I don't know how close they are to Houston. Unfortunately, most Amiga repairs these days are either DIY or send-overseas.

Anyway, we can start looking into some of your problems:

1. Graphics card. The first challenge with installing a graphics card is finding one! They're not common these days and tend to be rather expensive. Do you have one already?

2. RAM. What do you have currently? The A3000 motherboard can take 16MB of Fast RAM and 2MB of Chip RAM. To get more, you need a CPU board with RAM slots, which can add up to 128MB more, or a Zorro-slot RAM expansion, which adds 128MB or 256MB. I think the slot-based expansions require a revision 11 Buster chip.

3. There's no room in the A3000 case for a CD drive, so you'll need to put the drive in an external SCSI case and then connect it to the A3000's SCSI port. Some quick eBay searching shows that these are fairly expensive these days. Maybe check with your university's IT department to see if they might have an old one kicking around? this is the sort of thing you'll want to look for.

4. OS upgrade. Do you have 3.1 or 2.x installed currently? If it's 2.x, you'll also need a new 3.1 Kickstart ROM.

5. In case you're not aware, the clock batteries in Amigas tend to leak after a long period of time, causing damage to the motherboard. In the 3000, the proximity of a leaky battery to the video circuitry can sometimes cause display problems. Hopefully this isn't your problem, but it's worth checking your battery just to be safe. If you don't have any cards installed in your 3000, it's as simple as popping off the case cover (remember to take antistatic precautions). With the machine facing front and looking at it from the top, the battery is the horizontal barrel shaped thing (usually blue or green, sometimes red) halfway up the board near the left edge. Here is an example. If you see any white powdery stuff near the battery, let us know and we'll advise on removal.

6. Not sure what could be going on with your floppy drive, but hopefully it's not too complicated. A good first step would be to try cleaning it. I once put a moldy old disk into my drive and it caused all sorts of read-write errors afterward. After a few rounds with the cleaning disk all was well. If you do end up replacing the drive, make sure to save the eject button!

I'm assuming your power and disk LEDs are no longer lighting? I have the same problem on my 3000 - the little board that contains these LEDs is incredibly fragile and is easily damaged, breaking the circuit. Replacement boards are extremely rare, but the circuit is incredibly simple. It should be possible to bypass the broken traces with some jumper wire.


I hope this is a helpful start! If you post a new thread in the Hardware sub forum it should attract some more attention. Hopefully we can get you fixed up!