@ Kawazu
Belive it or not, it wasn't until today, and after 2 weeks after placing my order with Amigakit, that I received my jumpers. So I have a coupe of questions before installing my Deneb card this weekend:
1. What is the correct way to connect the two USB adapter cables (the ones attached to the plate) to the pcb? Do the metal contacts in the black plastic connectors face up or down? How can I tell what is the right position? Someone else in this forum told me that I have to be extremely careful when connecting those 2 cables, or I can fry the pcb.
2. About the jumpers. It seems in your picture that the pins that I will jump are the first two ones from right to left facing toward the daugther board, right? And is the jumper placed perpendicular to the axis of the jumper board, on top of the first two pins?
If you could please send either a small hand made drawing or a close-up picture. In any casde any help you can give me will be fully appreciated.
Regarding point 1, as you can see in the second picture posted above, the black wires should face away from the edge connector (the part that plugs into the Zorro slot).
There are 10 header pins all in a row. Set the card so that those pins are facing you. Connect the first USB cable so that the black wire covers the rightmost pin. The remaining wires in the cable will cover the next 4 pins. Now do the same for the second cable, this time for the rightmost pin that's still exposed.
Hopefully another user can post a more detailed photo.
