Welcome, Guest. Please login or register.
Forums
« previous next »
Pages: [1]   Go Down

Author Topic: Interestung A600's  (Read 2509 times)

Description:

0 Members and 1 Guest are viewing this topic.

Offline Matt_H

Re: Interestung A600's
« on: July 10, 2009, 05:21:56 PM »
My A600 came with that .229 ROM as well, but I was never sure if it was a misprint for .299 or if it was actually something older. It's not installed right now (replaced with 3.1), but if yours is, you could check the boot screen or SKick to see if the internal code says .229 as well.
« Last Edit: July 10, 2009, 05:40:07 PM by Matt_H »
Logged
 

Offline Matt_H

Re: Interestung A600's
« Reply #1 on: July 10, 2009, 06:01:58 PM »
The rev 2D board at The Amiga Hardware Database shows a .299 chip with the same part number as my .229, suggesting a misprint.

The labels and board revisions might have something to do with territory of origin. My A600 was from the UK and with an intact warranty seal. I think it was a 1.5 board, but it could be 1.3.
Logged
 
Pages: [1]   Go Up
« previous next »