BlizzardSCSI problems..

[Matt_H]

Type 'version 1230scsi.device' in a shell. Does it return anything? If so, then I suspect either:

Your CD drive is broken
Your SCSI chain is not terminated properly
Your CD mountlist or drive is misconfigured

It's trying to mount your CD drive, configured as unit 1, from the SCSI Kit. If the drive isn't jumpered as unit 1, then the problems you've reported are to be expected.

EDIT: Is your hard drive on the internal IDE bus or the SCSI bus?

[Matt_H]

I seem to remeber that if you upgraded to a higher CPU accelerator the SCSI device had to be changed to 1240scsi.device

Not so. At least, not with the version of the SCSI Kit that I used. It was still 1230scsi.device on my Blizz1260.

[Matt_H]

Prhaps tis a SCSI ROM version that caused it ?

That seems possible, as I have seen references to 1240scsi.device and 1260scsi.device in some very old documention. I had previously thought it to be a mistake.

[Matt_H]

Did you get the version information on 1230scsi.device? Please report back if that works/fails.