ZorroII picassoII shows in early startup menu as working, but not on showconfig

[Matt_H]

As I recall, the PicassoII is supposed to Autoconfig as 2 devices, so you're okay there.

Are you running 3.9? Back when I used a PicassoII, it had some issues with the ROM Update - the board would autoconfig from a cold start (meaning, checking Early Startup Control right after powering on), would not be detected afting kicking in the 3.9 Update file, but would be detected on subsequent warm reboots (triggered by Ctrl Amiga Amiga - reboots triggered by software wouldn't work).

Give it a warm boot a few more times and see what happens.

[Matt_H]

Glad to hear it's working :-)

I never found a work-around. You could disable the ROM Update, but that would cost you some other functionality. What I did was hit Ctrl+Amiga+Amiga right after the reset from kicking in the Update file, but before the hard drive access started up again.