OK, here we go I would have to belive you might have some kind of conflict with your scsi controller. Check that out first termination ect.
I have had many miggy's and they all have their on problems ie.. A4000D,A3000D,A2000D and A500. I also have had a MK III cyberstorm and that was nice in my A4000. I had many config problems with that 4000 ;so I sold it.
I would test the cdrom out also but most likely it is good. Check to see where all your drives are on the scsi chain and you can check each drive by disconnecting it from the others.If all you have is the cdrom on the scsi and the hard drive on IDE then you should not have any problem.What drives do you have on each controller?
CDFS could also be the problem I can't remember but I do recall having some problems getting cd's to read and drive to mount.Check your user start up and you should see the mounting script in it.
:-D :-D :-D :-D :-D :-D
