Welcome, Guest. Please login or register.

Author Topic: Amiga Case Screws  (Read 8348 times)

Description:

0 Members and 1 Guest are viewing this topic.

Offline danbeaverTopic starter

Software Notes: Picasso96 & File System Hex
« Reply #14 from previous page: April 26, 2015, 10:36:02 PM »
Ok, this not directly hardware related, but may be useful:

Picasso96 Settings -- For a 60 Hz Monitor

Resolution: 640 x 480
CLK: 29.82
808 520

Resolution: 800 x 600
CLK: 38.02
1032 640

Resolution: 1120 x 832
CLK: 80.44
1440 910


Resolution: 1152 X 900
CLK: 84.38
1522 931

Resolution: 1024 x 768
CLK: 84.38
1336 800

Resolution: 1280 x 1024
CLK: 108.90
1600 1126

Resolution: 1920 x 1080
CLK: 165.38
2208 1118        

 [FONT="]Hex numbers for the addition on another file system[/FONT]
[FONT="]
[/FONT]
[FONT="]AmiCDFS         43444653[/FONT]
  [FONT="]Fat95                 46415400/01[/FONT]
  [FONT="]FAT                    46415400[/FONT]
  [FONT="]NTFS                 4E544653[/FONT]
  [FONT="]PFS_AIO           50465300[/FONT]
  [FONT="]PDS/03              50445303[/FONT]
  [FONT="]PFS/03               50465303[/FONT]
  [FONT="]SFS/00/02          53465300/02[/FONT]
 

Offline danbeaverTopic starter

Re: Amiga Case Screws
« Reply #15 on: April 27, 2015, 03:41:24 AM »
I have run into that and both Mike_442_Olds and I use LokTite "Blue" for stripped holes; the blue allows screws to be removed, the "Red" does NOT!