Welcome, Guest. Please login or register.

Author Topic: help getting my old scsi external HD going with my A1000  (Read 1718 times)

Description:

0 Members and 1 Guest are viewing this topic.

Offline danbeaver

Does the GolemSCSI.dms disk not contain the software to set it up?

Quote from: klx300r;736354
  • Hi guys, setting up my faithful A1000 in my newly built home office and trying to get my Golem scsi external HD up & booting wb1.3 again.  Last time I had my A1000 set up she booted up fine but now the scsi HD is not seen and I can only boot up using my kick and wb disks.


don't recall (or at least I can't find) any setup disk so any help will be appreciated.  

here's some info from the web on my scsi controller & external drive:


[/I] Golem HD3000 & HD3000A- A500 / A1000 version


  • the interface box connects to the side expansion connector and has passthrough connector
  • the separate hard disk box has its own internal power supply and is connected by a DB19 cable
  • the A500 and A1000 interface boxes are different
  • place for a 3.5" hard disk inside the case
  • hard disk activity LED
  • power LED (on HD3000A only)