ELBOX New Spider device

[danbeaver]

1) The spider.device is up to 3.22 a download from the beta section.
2) As far as programming an NEC card, Mech has the actual details.

[danbeaver]

MorphOS is a lot like the Canadians

[danbeaver]

What other PCI cards are in use, what does Medconfig have for used graphic memory, which version of the PCI.library are you using?

[danbeaver]

Well,lets assume you are using pci.library version 9.7 and spider device 3.21 or 3.22; when you go into Trident does it show the card as online?  Have you assigned the three different units?  In Trident, you add in the unit numbers 0,1, and 2 and take each online individually.  The green "light" will go on in Trident if the USB stack is functioning.

[danbeaver]

Ok, I see unit zero (0), where are units 1 and 2?  To be functional all three units must be added and brought online.  If you haven't done this, go to Add Device, select the spider.device, set the unit number to 1 then press Online; and do the same for unit 2

[danbeaver]

Well, it sounds like the card has a problem; you can try cleaning the contacts and the slot or try another slot, but if you get the same results then something isn't right

[danbeaver]

Secondly, Poseidon works fine with the Spider device; but if you are concerned about the way that Elbox treated Chris, then show support for him by buying a RapidRoad USB device from Jens who set up an arrangement with Chris almost 2 years before the RapidRoad came to market.

[danbeaver]

Perhaps it is misreading the Manufacturer's ID code wrong?

[danbeaver]

No, I believe $1033 is the correct code; it was just a shot in the dark :-)

[danbeaver]

I could suggest that you have another Amiga user with a Mediator test it...