Amiga.org

Amiga computer related discussion => Amiga Gaming => Topic started by: Matt_H on June 09, 2004, 03:04:00 AM

Title: WHDLoad and screen promotion
Post by: Matt_H on June 09, 2004, 03:04:00 AM

Does anyone know if it's possible to promote WHDLoad games to DblNTSC or DblPAL modes?

It doesn't work with ModePro, giving an error message stating that the video display can't be initialized. However, the requester also wants to ensure that the appropriate monitor drivers are in Devs:Monitors, listing NTSC, PAL, DblNTSC and DblPAL. This suggests it might be possible...

Title: Re: WHDLoad and screen promotion
Post by: gizz72 on June 09, 2004, 03:25:17 AM

Hello matt,
 AFAIK, on the WB side. If you look at Storage:monitors you might find the drivers then copy to devs:monitors.
 I once tested an orignal IBM VGA monitor with an RGB<->VGA with my A1200. I connected a TVMonitor with RCA so I can see through the interference/fuzzyness of the VGA mon.
 Once copied to their respected place, i doulble clicked it(VGA). reboot it then the VGA monitor's display is modepro'ed. But slow in refresh rate. Maybe you could try that.
 On the WHDLoad side, I'm not sure if dblpal/ntsc works under WHDLoad. But try to click on the game icon once then right-MouseButton,select Icon,Information. at tools click new and Type-in dblpal or dblntsc. save. But, I maybe wrong. Never tried it yet. Hope that helps. Good luck matt. :-D

Good day to all Amigans! :-D

Title: Re: WHDLoad and screen promotion
Post by: Matt_H on June 09, 2004, 03:34:29 AM

I've got DblPAL, DblNTSC, and VGAOnly all mounted in Devs. IControl's Mode Promotion is enabled, but DblPAL and DblNTSC are not valid tooltypes for WHDLoad. No dice.

There's only one last thing I can think of trying, and that's removing the 15KHz NTSC and PAL drivers from Devs:Monitors. I'll try that before my next reboot.

Title: Re: WHDLoad and screen promotion
Post by: gizz72 on June 09, 2004, 03:55:23 AM

@matt

Quote

There's only one last thing I can think of trying, and that's removing the 15KHz NTSC and PAL drivers from Devs:Monitors. I'll try that before my next reboot.

Yes do that. Almost forgot, Also use WBScreen and select the appropiate freq(dlbpal/ntsc) settings. Good luck.

Good day to all Amigans! :-D

Title: Re: WHDLoad and screen promotion
Post by: Slash on June 09, 2004, 09:02:09 AM

WHDLoad games don't use Workbench or AmigaDOS in that fashion.

They bang the hardware and therefore won't take any notice of monitor drivers, modepro or anything like that.

It just won't work.

Buy a ScanDoubler  :-)