Amiga.org
Amiga computer related discussion => Amiga Hardware Issues and discussion => Topic started by: Peter_s on May 30, 2004, 08:50:04 PM
-
Ok I fitted my bvision into my amiga 1200 power tower,bppc603e/040 today and made sure everything was connected right, then used the install floppy disk that came with the bvision ( b-vision ppc v2.8,install disk,cybergraphx v3 r70a)but all I get this the following message
The specified card is not installed or there is no driver available
Does anyonre have any ideas?
SETUP:
A1200 PT,bppc 603e/040,350w PSU,Mediator,20gig HDD running OS3.9.
-
Does your bppc have a recent flash-rom which recognises the bvppc ? Does the Amiga screen appear on the bvppc output, even without drivers ?
Get a recent flash update from here: http://www.dcecom.de/downloads.html
P.S. why do you take a bvppc if you could have a Voodoo ?
Erm, now that i mention it, do you perhaps have Picasso96 installed with the Mediator ? If so, you have to uninstall it. P96 and CGX cannot be mixed.
Bye,
Thomas
-
Hi and thanks Thomas
Does your bppc have a recent flash-rom which recognises the bvppc ?
To be honest I couldnt tell you, but I'll have a look at that Thanks for the link.
I've got the voodoo 3 2000 sitting here aswell and I had it fitted into the amiga, and it worked fine except I kept getting warpos has detected the ppc.libray and cannot run with it, click terminate or cancel(or something like that)
The P96 is'nt install, I done a quick format and started from scratch to try the bvision.
---------------------------------------------------------
Just a quick update all it needed was the flash update, many thanks thomas :-D