Amiga.org
Amiga computer related discussion => Amiga Hardware Issues and discussion => Topic started by: BIG-IRON on May 29, 2004, 06:40:53 AM
-
anyone used a converter to get a 50 pin down to 25 for an external cd rom player? I see lots of 50 pin cd players but I want to hook it to the external scsi port.
-
Hi,
I buy from Software Hut. My Yamaha CDRW was supplied with that adaptor. Don't remember the price.
Chris
-
Buy a cable that has the correct connectors on both ends.. DB25 for the computer and centronix / microd50 for the peripheral. Don't forget the termination!
There is a converter / cable available between any types of SCSI connector, google around for online stores.
-
Or make your own... check the SCSI connectors here: http://www.hardwarebook.net/connector/index.html
-
@Big-Iron
Those DB25 to 50 pin Centronics cables are common
and easy to find on EBay (also inexpensive, around
$10.00 ballpark).
-
If it's a newer drive it probably has a high density DB connector, which would render a Centronics cable useless, so check that first... :-P
/Martin
-
I, too, deal with Software Hut - they can supply just about any cable you may need for a fair price. Check their web page at
www.softhut.com
But they have much more than is listed on the web site.
-
And when looking for this kinda stuff bear in mind that more Apples than Amigas used this kind of connector.
I paid £10 for a new 25-D to Centronix lead about 7 years back, and £5 for a used Contronix to high density centronix lead off of eBay.