Amiga.org

Amiga computer related discussion => Amiga Hardware Issues and discussion => Topic started by: Dragster on May 24, 2004, 01:34:32 AM

Title: Cyberstorm MK II manual?
Post by: Dragster on May 24, 2004, 01:34:32 AM

Hi!! :)

Just wondering if anyone could point me to a place where I can download a pdf copy of the phase CS MK II 68060 board user's guide. I have one of those boards but the A4000 won't boot with it (although I saw the board working a few days ago), I don't know what happened. I was thinking maybe I have to do something to make it work , jumpers, etc.. that's why I'm asking for the user's manual/guide.


thanks in advance!!!

Dragster

Title: Re: Cyberstorm MK II manual?
Post by: aardvark on May 24, 2004, 06:20:14 AM

Here is DCE's download page, you may find something useful here.
dcecom.de/downloads (http://www.dcecom.de/downloads.html)

Title: Re: Cyberstorm MK II manual?
Post by: Castellen on May 24, 2004, 06:49:36 AM

There is some information and a link to the jumper descriptions here:
http://www.amiga-hardware.com/cybermkii.html

You need to set both the clock source jumpers on the computer motherboard to the correct position or the card will not run.  I'm pretty sure they need to be set to EXT (external clock).

Check the 200 pin connector is firmly seated all the way along, and one end is not sticking up.

Title: Re: Cyberstorm MK II manual?
Post by: Dragster on June 01, 2004, 10:19:46 PM

Quote

You need to set both the clock source jumpers on the computer motherboard to the correct position or the card will not run.  I'm pretty sure they need to be set to EXT (external clock).



This did the trick! Thanks!!

Dragster

Title: Re: Cyberstorm MK II manual?
Post by: adolescent on June 01, 2004, 10:30:47 PM

If you still need a copy I can scan mine this weekend.

Title: Re: Cyberstorm MK II manual?
Post by: TjLaZer on June 02, 2004, 04:00:17 AM

I would be interested in a nice PDF.  If you want I can build one if someone wants to email me the scanned images.  Must be good quality though.

Title: Re: Cyberstorm MK II manual?
Post by: Abou27 on January 10, 2005, 08:42:05 PM

Hi

Just bought a CBMKII 060 on eBay and have been searching everywhere for info or a manual and I stumbled upon this thread!  Curious about whether the pdf idea happened in the end?

Title: Re: Cyberstorm MK II manual?
Post by: x56h34 on January 10, 2005, 08:48:30 PM

What's funny about this thread is that the jumper positions should be set to INT and not EXT, however Dragster reported that it worked for him...

As far as Phase 5/DCE accelerator cards for A4000 go:

INT should only apply for CSMK-II

EXT should apply to CSMK-III and CSPPC

Title: Re: Cyberstorm MK II manual?
Post by: X-ray on January 10, 2005, 08:55:34 PM

@ all

I have scans of the MK-II manual and the CyberSCSI Module manual. PM me your email adress if you want them.    

Title: Re: Cyberstorm MK II manual?
Post by: nex4060 on January 10, 2005, 08:55:47 PM

It's the MKI that need the INT and the MKII/III/PPC needs the EXT

Title: Re: Cyberstorm MK II manual?
Post by: x56h34 on January 10, 2005, 09:32:07 PM

@nex4060:

I forgot about the CSMK-I, the ancient one. :-)

Anyways, as far as the CS-MKII, CS-MKIII, and CSPPC cards go, my information is 100% correct.

CS-MKII definitely needs the clock jumpers set to INT in order to work.

Title: Re: Cyberstorm MK II manual?
Post by: X-ray on January 10, 2005, 09:44:08 PM

x56 is right.

I have the MKII and a PPC, and they use different clock jumpers (I actually made the mistake of using a PPC on jumpers set for MKII and I had  problems).

Title: Re: Cyberstorm MK II manual?
Post by: Framiga on January 11, 2005, 12:27:48 AM

@x56h34

confirmed . . .just tested a CSMKII on my system in INT CLOCK mode.

On an friend A4000CR mobo, the CSMKII doesn't works (seems for the lacks of the 50 Mhz quartz on the mobo).