Amiga.org
Amiga computer related discussion => Amiga Marketplace => Topic started by: Knapster on May 04, 2004, 12:22:48 AM
-
For more information, go here (http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=8103802364)
This bus board plugs in flat to the Amiga's motherboard, unlike the original daugherboard that plugs in 'upright', meaning this is perfect for modding your miggy into a tower or if you need 2 video slots for graphics work! Zorro Slots: 7 (2 are in line video slots)
I used both video slots together without problems. The board has a jumper for a reset switch, that is also very useful!
There is also a PSU connector for Elbox PSU's, although I powered the board through the standard Amiga (motherboard power connector). You may need a higher rated PSU if you plan to use lots of HDDs etc. as well as lots of Zorro Cards. I modded an old AT power supply with the amiga power connector to meet my particular needs!
Thanks Amiga.org