Amiga.org

Amiga computer related discussion => Amiga Hardware Issues and discussion => Topic started by: Crusher on April 28, 2004, 04:33:54 PM

Title: Fastlane, A3KT and A3640 problem.
Post by: Crusher on April 28, 2004, 04:33:54 PM

I have two FastLaneZ3 and none of them want to work with my A3KT. The Amiga doesn´t even boot into early startup so I can´t see what´s wrong. I know they work though and I have the manual.
Anyone with an idea?  :-)

Title: Re: Fastlane, A3KT and A3640 problem.
Post by: x56h34 on April 28, 2004, 04:45:01 PM

Does your A3K have Buster 11 in it? Fastlane Z3 requires Zorro III DMA, and for that to work properly, Buster 11 is required.

Title: Re: Fastlane, A3KT and A3640 problem.
Post by: Crusher on April 28, 2004, 05:12:58 PM

Yes, it has all the new chip in it.  :-)

(It doesn´t require vers 11 only 09 according to the manual.)

Title: Re: Fastlane, A3KT and A3640 problem.
Post by: vpcs on April 28, 2004, 05:16:32 PM

Version 9 is very buggy  Hope you have ver. 11

Title: Re: Fastlane, A3KT and A3640 problem.
Post by: Crusher on April 28, 2004, 05:29:52 PM

Ehm.. yes I have all the new chip in it.  :-)

Title: Re: Fastlane, A3KT and A3640 problem.
Post by: Lemmink on April 28, 2004, 05:38:18 PM

I remember there is an issue with the combination Fastlane / A3640. Due to a designfalt of the A3640 you need to replace a tiny chip on the Mobo. Try it without the A3640 and see what happens.

Title: Re: Fastlane, A3KT and A3640 problem.
Post by: Crusher on April 28, 2004, 05:42:43 PM

That is what I suspect, but according to the manual the problem is on the A4K (although it doesn´t say anything about the problem on an A3K) but on the A3K you only need a Buster 09 or pref. Buster 11.

But where should that FCT240 be on an A3K then?  :-)

Title: Re: Fastlane, A3KT and A3640 problem.
Post by: Gaeokerena on April 28, 2004, 10:53:56 PM

I have a fastlane that also does not work on my 4000 with a 3640 rev 3.1 and buster 11. The post screen comes up with one part showing up as defective!!!

any suggesstions

Title: Re: Fastlane, A3KT and A3640 problem.
Post by: Crusher on April 29, 2004, 12:29:36 AM

If you haven´t changed the 74FCT244 to the supplied 74FCT240 clock driver chip then you´ll bound to have problems. It´s a DIL module located on the motherboard marked U103. All according to the manual.  :-)
Although they are talking about the A3640 ver. 3.0 but it might be the same with 3.1.

Title: Re: Fastlane, A3KT and A3640 problem.
Post by: T3000 on April 29, 2004, 02:40:40 PM

I recently installed a FastLaneZ3 into my 3000T running a v3.0 3640 and v7 buster.  Fires up fine with 64 megs installed. Have yet to attempt working with the scsiII connection untill v11 buster is installed.

Double check all those Fastlane jumpers.

...and this may sound useless, but try installing the Fastlane into a different slot. I have mine just below the video slot.

good luck.

Title: Re: Fastlane, A3KT and A3640 problem.
Post by: Crusher on April 29, 2004, 05:27:06 PM

@T3000, Sounds good I´ll try that.

Although I have now tested the card in my A3KD with stock 030 and it worked fine there but I only get the mem to work. When I try to do anything with the scsi then my Amiga won´t start.  :-)