Amiga.org

Amiga computer related discussion => Amiga Hardware Issues and discussion => Topic started by: locutus on April 22, 2004, 07:29:10 PM

Title: Apollo 4060 board in A3k (towerd)
Post by: locutus on April 22, 2004, 07:29:10 PM

Hello, i'm getting such a CPU board soon.

I just read on http://amiga.resource.cx that on the A3k you need a patch wire between the kickrom and the SCSI chip, does anyone know the details about it ? and if this is really needed.

Greetings :-)

Title: Re: Apollo 4060 board in A3k (towerd)
Post by: x56h34 on April 22, 2004, 07:30:37 PM

My guess is that this is the INT2 hack solution but through a different method.

Title: Re: Apollo 4060 board in A3k (towerd)
Post by: lordnicon on April 22, 2004, 08:33:42 PM

For installation in an A3000 series machine you will require a chip adaptor which was usually supplied with the card. The SCSI chip on the motherboard and one of the Kickstart ROMs should be removed and inserted into the adaptor, wish is then placed into the empty sockets on the motherboard.