Amiga.org
Amiga computer related discussion => Amiga Hardware Issues and discussion => Topic started by: J-Golden on April 09, 2004, 04:18:15 AM
-
Hey all, While I'm getting the X-miga up and running, I thought I'd do some streamlining of my other Amigas. Unfortunatly I've hit a snag and am ebarased to say I don't know what to do....
I have a A4000T with Cyberstorm PPC in it. it currently has 2 Hard drives, one on the MoBo SCSI and one on the Ultra wide PPC SCSI controller. The HD on the MoBo is a UW SCSI with an adapter so I took off the adapter, set it to a non-conflicting ID and hooked it up.
First off it doesn't show up in the boot menu nor is it seen once the comp. is up and running.
I go into cyberscsi tools and run "unit control". it only shows the orig HD until I hit the "rescan" button in which it pulls the other HD up. I can then mount it and use it fine but when I reset the A4000, it doesn't see it.
ok, I KNOW I'm missing something simple here, please slap me in the back of the head and help a guy out.... TANKZ!
-
HE HE!!!!!
Never mind, I was looking at teh "how to disable the SCSI on a 3000" where some one talked abo. holding down the ESC key...... This is why I wish I had the maual.
It's all working great!!!
SEE YA!!!
-
You can download the manual from http://www.dcecom.de/downloads.html (mkiii.pdf).
But the Esc key is not in the manual. It has been added to the flash rom later. Get the latest flash rom from the above link and read the FlashBIOS.txt file.
Bye,
Thomas
-
Thomas wrote:
You can download the manual from http://www.dcecom.de/downloads.html (mkiii.pdf).
But the Esc key is not in the manual. It has been added to the flash rom later. Get the latest flash rom from the above link and read the FlashBIOS.txt file.
Bye,
Thomas
Cool! tankz for the info.