Amiga.org
Amiga computer related discussion => Amiga Hardware Issues and discussion => Topic started by: VmanJeff on September 11, 2025, 11:09:45 PM
-
Putting together my 4000T Toaster/Flyer again and things are working well but there is an issue…. The TBC IV I sourced did not arrive with the Din-9-M to Serial cable. (Attaches to the Amigas Serial port on the back and to the TBC’s round Din9 connector allowing control from the installed software) I’ve been searching the web and so far nothing. AliExpress has a couple listed but I’ve never ordered from them and who knows if the Pinot is correct. So I’m looking for either
A - someone who has one they are willing to part with in the US
B - someone who’s willing to continuity check theirs and tell me the Pinot so I can make my own
C - someone with knowledge of the proper way to install an internal cable to the 3 pin header on the TBC then to the A4000T motherboard if that is possible.
Also looking for an original mouse round plug extension for sale in the US. All I find are overseas vendors.
The photo attached is of the faceplate adaption I made for the zuzuSCSI and SD card extension connector. Works great! As does the Zulu. Except I’m having one heck of a time configuring the wi-fi
-
https://www.ebay.com/str/myamigashop
I am confident this person either has what you need or get it for you. I am not related to the seller, but they've always treated me with excellence. Good Luck!
-
Thank you! I'll check with him.
I did find the pinout in the manual so I can make one if need be but other sources are always welcome