Amiga.org
Amiga computer related discussion => Amiga Hardware Issues and discussion => Topic started by: pmack on February 24, 2025, 12:16:03 AM
-
My PCMCIA adapter on my A1200 used to work fine. I had the computer stored for a few months and now when I turn it on everything works except the PCMCIA reader. If there is no card in it, nothing happens. If I insert a card (I tried many, including at least one I know worked before) the computer either freezes or cannot read anything from the card (behaves as if the card is not inserted). I tried two adapters so it should not be the adapter itself. Any ideas?
-
Do you have expansion ram over 4MB that is not PCMCIA friendly? Other than that try re-installing or checking for the latest version of the CFO: dosdriver, fat95 and compactflash.device.
Edit: also try re-formatting the cf card to FAT32.
-
What is your exact hardware config.
As already posted, what RAM card. As what your describing, sounds exactly like 8MB conflict.
-
That was it! I do have a memory board that was apparently causing this issue. Thanks for both of you