Amiga.org
Amiga computer related discussion => Amiga Hardware Issues and discussion => Topic started by: garyg on January 14, 2025, 10:40:22 PM
-
I have an A4000/060 desktop running OS 3.9 without any Boing Bags installed
on a Picasso IV.
Every so often I get a pop-up message like one of these two when running
Bars&Pipes Professional. After I click on OK I can go back to the program.
Would installing Boing Bag 1 fix this?
Regards to all and thanks in advance for any advice,
Gary
-
That’s nothing to do with boing bags I’m afraid. Although ideally you should at least be on BB2.
That error is to Down to your SCSI devices. I take it you have a SCSI HDD or the like? Such as a Phase 5 or DCE?
Have had these errors. It maybe down to a failing drive, damaged cable or more likely a Termination issue on the chain.
Also check if you are using some wrong SCSI setting. Such as a device like a CD drive. These sometimes need to be set to Asynchronous or synchronous as it’s running too fast and losing connection.
-
OK, thanks. The internal CD-ROM has been acting up for months (making noises) and is not working.
Most likely, I think, is the 730 MB SCSI HD, which is almost 30 years old (and otherwise still working!)