Amiga.org
Amigakit Hardware => A600GS & A1200NG => Topic started by: SkulleateR on September 20, 2024, 12:44:55 PM
-
I created a simple HDF with just the Workbench 3.1 files on it (not installed, just a "COPY DF0: to DH0: CLONE ALL" ) but if I set that up on the A600GS I only get a Red Screen (Rom error) with JIT and a Software Failure without JIT enabled ... but when I make the same setup only using the ADF everything works (but slow of course) and it´s also showing me the correct kickstart/wb version after boot.
The HDF works fine in FS-UAE and Amiberry on my Mac, so what is the problem here ?
-
Just switched to A600GS-AGA config and here the HDF ist booting but looks "weird" :o
-
Isnt that loading the AROS rom, hence the odd icons and stuff. Plus your getting verbose output in CLI, which happens with AROS rom.
Kickstart 51.51 is not 3.1, 3.1 is 40.68
-
Isnt that loading the AROS rom, hence the odd icons and stuff. Plus your getting verbose output in CLI, which happens with AROS rom.
Kickstart 51.51 is not 3.1, 3.1 is 40.68
Sure, that´s the replacement ROM because I changed from A1200 config to A600GS-AGA config, the point is -> the HDF is working but it isn´t with Kick 3.1 in A1200 config ! That´s my point 8)
-
Ok, I had a retry with my old A1200/OS3.9 setup and that works with A1200 Config and Kick 3.1 ... seems that FS-UAE did some funny things with my HDF, just created a new one on WinUAE in a VM on my Mac and that works perfectly. So sorry for the "fake news" ::)
-
Ok, I had a retry with my old A1200/OS3.9 setup and that works with A1200 Config and Kick 3.1 ... seems that FS-UAE did some funny things with my HDF, just created a new one on WinUAE in a VM on my Mac and that works perfectly. So sorry for the "fake news" ::)
Probably worth checking for any FS-UAE updates.
-
Probably worth checking for any FS-UAE updates.
Probably not, last update was around three years ago ... ;)
But since i know the problem I also know how to workaround ... thanks :)