Amiga.org
Amigakit Hardware => A600GS & A1200NG => Topic started by: THX-1138 on August 04, 2024, 03:43:18 PM
-
Mine isn't updating from 46.1.794 to 46.1.795, if I click Install Update from the AmiSphere Profile screen, I dialog box appears for about a second before vanishing and nothing happens. If I try again, everything greys out and I have to pull the power. This seems to be a recurring problem for me.
-
Mine isn't updating from 46.1.794 to 46.1.795, if I click Install Update from the AmiSphere Profile screen, I dialog box appears for about a second before vanishing and nothing happens. If I try again, everything greys out and I have to pull the power. This seems to be a recurring problem for me.
Exactly the same is happening for me.
-
Try again as, you may have been trying to update as it was in process of being uploaded.
-
No change. Tried again. Same as previously described.
This is a recurring problem, I've been working around it by reflashing the SD card and doing an immediate update - but I can't keep doing that forever. I hadn't even installed any of my own apps etc this time as I suspected it would happen again.
-
Very odd, as I reported this issue, and it has been fixed in version you have.
What does it state in box, as it will tell you what it is doing.
-
It says nothing I can read, as I said it appears for a second if that and then vanishes, this is what happens.
I click Install Update from the AmiSphere Profile screen.
A grey dialog box appears for about a second before vanishing and nothing happens.
If I try again, everything greys out and I have to pull the power.
-
I managed to snap this pic before it vanished, this is all that appears.
-
I'm gonna rewrite my SD again so I can do the update, hopefully, as that's been the way I've done it before. Hopefully the cause of this issue will be found and fixed soon.
-
I have re-written my SD card. Setup from scratch yet again. Done the update.
It updated to 46.1.794
I STILL cannot update to 46.1.795
So what do I do now?
-
Well from what your describing. Sounds like 46.1.794 latest.
Will check if 795 is public yet. Its only a minor update to fix registration problem.
-
I believe the 795 is the latest with the new game added. I could be wrong but 795 appeared after the announcement.
-
If that's the latest then the games did not install with the update on mine.
-
Just to confirm still not working for me either. It offers 46.1.795 but maybe that wasn’t meant to be live yet as you said @F0LLETT ?
-
Same issue here, just tried it today.
I saw the update announcement and hoped that it might be ok. I've not updated since the launch / registration issues were sorted.
It won't update to 795, stuck on 794.
At least it still works :)
-
Same here! Cant update or use the restore to factory setting. Amibench isnt working, its only show the blank Aros image with the aros arrow as a mouspointer. Cant do anything there. Launching games I installed myself works, but thats about it. Hopefully Amigakit will send me a new image to flash on my card, or this is the end of my A600gs...
-
Please check your Pm's.
-
I have exactly the same problem.
-
Mine didn't complete last night, worked fine today.
-
Mine didn't complete last night, worked fine today.
Thanks for letting us know. I tried mine again and it worked fine (updated to 46.1.795).
-
I am getting the same exact error that the original poster did trying to go from .795 to .806 Shows the update and when I press the update button a grey box appears for a second then disappears. After that it will show I have an update available but will not let me press the button to update as it is greyed out. Have to reboot by cutting power then it happens again. How can I get it to update or what can I do to fix?
-
I am getting the same exact error that the original poster did trying to go from .795 to .806 Shows the update and when I press the update button a grey box appears for a second then disappears. After that it will show I have an update available but will not let me press the button to update as it is greyed out. Have to reboot by cutting power then it happens again. How can I get it to update or what can I do to fix?
I'm in same boat. Trouble shooting it at moment. I have experienced both issues. Greys out and hangs on update screen and returning instanly without doing anything.
EDIT:- Logs show it is failing on one component and this messes up updating. Until a new version is uploaded. However its not effecting everyone.
A fix is in the works, as soon as its ready, will update.