Amiga.org

Amiga computer related discussion => Amiga Hardware Issues and discussion => Topic started by: Blaqua on June 17, 2022, 08:14:24 AM

Title: Fixed my amiga 600 rgb problem
Post by: Blaqua on June 17, 2022, 08:14:24 AM

Hey, i just wanted to share what fixed my amiga 600 (rev 1.5) rgb-output problem (red and green signals were missing) it was caused by leaked capacitors that harmed few transistors and resistors. I think blue signal was saved because it's some components are underside of motherboard.

(https://i.ibb.co/m8qjtzM/blaqua-a600-4.jpg)

exact part names:
2x SMD RESISTOR 1206: 33 kohm
2x SMD RESISTOR 1206: 1 kohm
2x MMBT3904 SMD

Title: Re: Fixed my amiga 600 rgb problem
Post by: hese7 on June 17, 2022, 08:26:48 PM

Ok, good job. Thanks for sharing.