Amiga.org

Amiga computer related discussion => Amiga Hardware Issues and discussion => Topic started by: pneron on November 12, 2020, 11:49:21 AM

Title: DF0 and DF1 access
Post by: pneron on November 12, 2020, 11:49:21 AM

I did some upgrades last week and not sure if I disrupted a jumper setting. When I connect DFO: ribbon cable, I have access to DF0: But when I connected both ribbon cables to DF0 + DF1, they are both "unreadable" (icon on screen).

Title: Re: DF0 and DF1 access
Post by: arttu80 on November 12, 2020, 04:45:57 PM

Hi!

Make sure you have J301 in closed position on motherboard. Unless this is some early German build "A" model..

Title: Re: DF0 and DF1 access
Post by: pneron on November 12, 2020, 05:04:15 PM

OK, I will double check to make sure this is in the closed positioned

Thanks

Title: Re: DF0 and DF1 access
Post by: pneron on November 13, 2020, 12:07:11 PM

Looks like my GOTEK DF1 has an issue and I will need to work on this. Thanks for the info