Amiga.org

Amiga computer related discussion => Amiga Hardware Issues and discussion => Topic started by: Ancalimon on June 30, 2020, 09:08:26 AM

Title: Help CyberstormPPC wrong LUN number
Post by: Ancalimon on June 30, 2020, 09:08:26 AM

I have two Acard SCSI converters. One is 7720UW for IDE drives and the other is 7730A for SATA drives. I have OS4.1 installed on the IDE drive.

When I press esc to enter scsi menu of CyberstormPPC, I set the number of LUNS for the SATA drive on unit 10 to 1 but MediaToolbox displays all 8 LUNS for the SATA drive under OS4.1 FE. Is there anything I can do to correct this?

Title: Re: Help CyberstormPPC wrong LUN number
Post by: Thomas on June 30, 2020, 10:06:49 AM

All I can say is that the Esc menu does not affect OS4.

I think there is a config file in the Kickstart directory which you can use to configure cybppc.device for OS4. Check the Documentation directory for details.