Amiga.org
Amiga computer related discussion => Amiga Hardware Issues and discussion => Topic started by: hishamk on April 15, 2020, 09:43:25 PM
-
I need to replace the suppression cap in my 3000's PSU which literally fell out when I opened it up for a clean. The unit is a Euro 220V/240v.
The original one is an ERO F1772-510-2030, 1uF X2 MKT HMF 250V (first two images).
I've found a similar one on eBay but I'm not sure if it's an exact/safe match. I do know that you can use higher rated caps in most circumstances, but when it comes to PSU's, I'd rather be doubly sure. (https://www.ebay.com/itm/ERO-1uF-Capacitor-250-VAC-Radial-Metalized-Polyester-Capacitors-1uF-250V/281873849657?hash=item41a0fd9d39:g:I8MAAOSwcBhWX4kV) (the third image).
Anyone know if the listed one is a good match?
Cheers
-
Any Polyester X2 1uF >250V Cap would do. I'd suggest a modern replacement rather than an old one.
https://au.rs-online.com/web/c/passive-components/capacitors/polyester-film-capacitors/?searchTerm=x2&applied-dimensions=4292338736
-
Cheers