Amiga.org

Amiga computer related discussion => Amiga Hardware Issues and discussion => Topic started by: matt3k on March 24, 2020, 03:03:41 PM

Title: 3000D 6 Power Flash and 8000000B to Black Screen
Post by: matt3k on March 24, 2020, 03:03:41 PM

I have a 3000D that never had battery damage that occasionally starts cold but will go to 6 PL flashes and give a 8000000B and eventually go to a black screen.

Tried reseating everything.

Any ideas?

Title: Re: 3000D 6 Power Flash and 8000000B to Black Screen
Post by: kolla on March 24, 2020, 04:24:24 PM

What is output of the CPU command? Is the 68882 recognised?

8000 000B is typical for attempting to run program that rely on FPU on a system that doesn’t have any. The A3000D comes with 68030 CPU and 68882 FPU, so that should not be a problem (unless you have a CPU card installed). Also, make sure Setpatch is in Startup-Sequence.

Title: Re: 3000D 6 Power Flash and 8000000B to Black Screen
Post by: kolla on March 24, 2020, 06:28:58 PM

Hm, reading again, I suspect your A3000 is not booting at all. From what I found, 6 PL blinks (5 short and one long?) is probably RAM error, faulty CIAs (have you tried swapping them?) or broken traces on motherboard.