Amiga.org

Amiga computer related discussion => Amiga Software Issues and Discussion => Topic started by: blakespot on November 29, 2019, 04:49:36 PM

Title: ANSI terminal prog that works over AmiTCP?
Post by: blakespot on November 29, 2019, 04:49:36 PM

I have an X-Surf Ethernet board I’ve my A2000 020 running 3.1 and use AmiTCP as the stack. Is there an ANSI supporting terminal program that works with this setup to allow telnet BBSing? I have Terminus, NComm, etc but am unsure if the TCP/Ip connection can be routed into these apps for connection, perhaps by device choice.

Thanks.


bp

Title: Re: ANSI terminal prog that works over AmiTCP?
Post by: TribbleSmasher on November 29, 2019, 05:09:45 PM

I have no clue, really, but maybe this works?
http://de.aminet.net/aminet/comm/tcp/telser140.readme

Title: Re: ANSI terminal prog that works over AmiTCP?
Post by: nbache on November 29, 2019, 10:42:08 PM

The one I have used since forever, on OS 3.x and 4.x alike, is this one:

http://de.aminet.net/aminet/comm/term/Term.lha

Best regards,

Niels

Title: Re: ANSI terminal prog that works over AmiTCP?
Post by: don27dog on November 29, 2019, 11:00:19 PM

DcTelnet

Title: Re: ANSI terminal prog that works over AmiTCP?
Post by: mindprober on November 30, 2019, 03:20:22 PM

Both options listed here will work. You can use telser.device modem emulation with your preferred terminal software. After much twiddling around, I have settled on TERM as many others have. I keep NComm and JRComm handy as close runner-ups.

You could also just go with DCTelnet which is a pure telnet program that will work over your TCP/IP connection. I use Roadshow myself since it is so fast and lightweight.

Title: Re: ANSI terminal prog that works over AmiTCP?
Post by: kolla on November 30, 2019, 03:47:35 PM

If you don’t mind MUI, AmTelnet is also an option, it supports zmodem transfers too.

Title: Re: ANSI terminal prog that works over AmiTCP?
Post by: Sbaitso on November 30, 2019, 06:37:49 PM

@blakespot

See PM.