Amiga.org
Amiga computer related discussion => Amiga Hardware Issues and discussion => Topic started by: JimDrew on May 30, 2019, 07:03:16 PM
-
OK, so I have an A1200 with Blizzard 030 board and memory. It works great, but I want to remove the accelerator and just use the A1200 bone stock. When I pull the accelerator the right mouse button no longer works in Workbench. I thought this might be an issue with the Workbench installation, but the same thing occurs when I boot with no startup-sequence and do LoadWB from an original WB disk. Put the accelerator board back in and it works again. Weirdest thing I have ever seen with an Amiga. Has anyone ever heard of this before? Are there any simple mouse button test programs out there. I don't want to have to write some test code if it already exists.
Thanks!
-
Dunno about the mouse but if you press "2" on boot the accelerator turns off.
-
Thanks, but I want to sell the 030 board (w/SCSI controller) and return to a bone stock A1200. Right now I can't do that! This machine USE to work perfectly. It was the machine that we ran our support BBS on for EMPLANT back in the early-mid 90's. I would like to put the BBS back online again and I don't want to waste an 030 board that could be used by someone else.
-
Dunno about the mouse but if you press "2" on boot the accelerator turns off.
Good idea...to see if the problem arises when the board is disabled but not removed.