Amiga.org

Amiga computer related discussion => Amiga Hardware Issues and discussion => Topic started by: Acill on July 13, 2016, 01:43:51 AM

Title: 4000T Replacement Tower!
Post by: Acill on July 13, 2016, 01:43:51 AM

At last! A tower I feel is a great alternative to the stock tower! I am VERY tempted to get one of these for mine!

http://www.ebay.com/itm/TT-780-Full-Tower-AT-Case-Chassis-Beige-w-Drive-Bay-Cover-5x-5-25-2x-3-5-NEW-/351762407574?hash=item51e6ac6096:g:lAsAAOSwGIRXZGVv

(http://i.ebayimg.com/images/g/lAsAAOSwGIRXZGVv/s-l500.jpg)
(http://i.ebayimg.com/images/g/XFQAAOSwbYZXZGV-/s-l500.jpg)

Title: Re: 4000T Replacement Tower!
Post by: nyteschayde on July 13, 2016, 01:47:38 AM

This may be a naive question, but do you need to use a dremel or other tool to make the motherboard ports work on the back side of the case? Or is this case targeted for an Amiga?

Title: Re: 4000T Replacement Tower!
Post by: Acill on July 13, 2016, 01:49:19 AM

The 4000T is a standard AT format and would drop right in.

Title: Re: 4000T Replacement Tower!
Post by: Jeff on July 13, 2016, 02:12:39 AM

Sometimes the two rows of pre-punched connector holes in the back of the case are in line with each other like the ones on the A4000T port board. If you look carefully at the pictures of the ebay case the holes appear to be staggered. The port board might not line up with that style case.

Title: Re: 4000T Replacement Tower!
Post by: Acill on July 13, 2016, 03:07:38 AM

Maybe, but not hard to around .