Amiga.org

Amiga computer related discussion => Amiga Hardware Issues and discussion => Topic started by: Chartus on April 15, 2016, 05:05:27 AM

Title: Indivision ECS in amiga 500
Post by: Chartus on April 15, 2016, 05:05:27 AM

Who has an indivision ECS in there 500.   Whats the revision of the MB ?  I tried putting one in a  Rev 5 mb with no luck.  Also broke it when I pressed down too hard.  (a little inductor on the bottom broke off and  I can't find out the value to get a replacement)

I just want to know if you had any problems when you installed it.

Title: Re: Indivision ECS in amiga 500
Post by: smf on April 15, 2016, 07:32:43 AM

I have used mine in A500, and then moved it to an A2000 and now it sits in an A600, no problem whatsoever with the installation. The revision i used of the A500 mobo is 6A iirc.

Title: Re: Indivision ECS in amiga 500
Post by: smf on April 15, 2016, 07:34:32 AM

If you want to fix it yourself you could try to contact Jens and ask about the component, he was very helpfull with the component details when i contacted him and asked about an X-surf i was attempting to repair.

Title: Re: Indivision ECS in amiga 500
Post by: Oldsmobile_Mike on April 15, 2016, 09:05:59 AM

A500, 6A, and A2000, 6.4, no problems in either.