Amiga.org

Amiga computer related discussion => Amiga Software Issues and Discussion => Topic started by: vince_6 on April 12, 2016, 04:21:43 PM

Title: WHDLoad v18.2-1
Post by: vince_6 on April 12, 2016, 04:21:43 PM

Hi everybody.

I have a problem with these versions.
When I run a game on my Amiga, it instantly crashes and reboots.
I installed my SD card on uae and run it at 5fps cause log didn't work (I changed the path from ram:t to dh0:)
I saw an error about key in progdir and then reboot.

I used an older backup of my WB from a pc folder with same results.
Even in command line with no startup-sequence I can run the exe and givem me the help screen but when I type the slave it reboots.
My Amiga is a 1200 with a blizzard 030/50, 64MB, SD Card 8GB (SCSI Patch), wi fi easynet and roms/os 3.1.

I also discovered this.
On UAE with a 030 config it crashes too, but with a 020 it works!

Confused.

Title: Re: WHDLoad v18.2-1
Post by: utri007 on April 12, 2016, 04:56:27 PM

You need to shut down easynet

Title: Re: WHDLoad v18.2-1
Post by: vince_6 on April 12, 2016, 04:58:14 PM

Quote from: utri007;807106

You need to shut down easynet

It confilcts with the new WHDload?
The card is not plugged and did the same on UAE though :-/

Title: Re: WHDLoad v18.2-1
Post by: amiga1260 on April 12, 2016, 07:58:22 PM

Did you set max transfer rate in HDTooolbox with the value 00x01fe00?

This could cause your problem.

Title: Re: WHDLoad v18.2-1
Post by: vince_6 on April 12, 2016, 09:04:05 PM

Quote from: amiga1260;807118

Did you set max transfer rate in HDTooolbox with the value 00x01fe00?

This could cause your problem.

Yes I did, I have SFS.
What do you suggest to do?

Title: Re: WHDLoad v18.2-1
Post by: paul1981 on April 12, 2016, 09:50:15 PM

Quote from: vince_6;807120

Yes I did, I have SFS.
What do you suggest to do?

Try copying over / re-installing the slave again now that you've adjusted MaxTransfer.

Title: Re: WHDLoad v18.2-1
Post by: vince_6 on April 12, 2016, 10:11:33 PM

Update:

When I run EasyNet software, go online and then log off, whdload work fine :-/

Title: Re: WHDLoad v18.2-1
Post by: Oldsmobile_Mike on April 12, 2016, 11:04:38 PM

Quote from: vince_6;807129

When I run EasyNet software, go online and then log off, whdload work fine :-/

From everything I've heard about that program, they should've called it "HardNet".  :lol:

Title: Re: WHDLoad v18.2-1
Post by: Gulliver on April 12, 2016, 11:17:48 PM

And SFS is never a good choice, as it is widely known its stability issues.

Either use FFS or PFS3-aio. Avoid SFS as much as you can.

Some SFS users get lucky others just...

:)

Title: Re: WHDLoad v18.2-1
Post by: vince_6 on April 12, 2016, 11:27:54 PM

I got the same probs on UAE booting from a folder with an old backup.
So there is no conflict with SFS.

Title: Re: WHDLoad v18.2-1
Post by: vince_6 on April 13, 2016, 01:41:27 PM

SOLVED!

You need to disable network from whdload prefs file by typing NoNetwork command.

Thanks everyone for your suggestions.