Amiga.org
Amiga computer related discussion => Amiga Hardware Issues and discussion => Topic started by: petercli on June 15, 2014, 07:55:47 PM
-
I am trying to install Classic WB , following these instructions :
http://classicwb.abime.net/classicweb/instructions.htm
and these :
https://www.youtube.com/watch?v=Zd42RsKHm5Y (https://www.youtube.com/watch?v=Zd42RsKHm5Y)
When I start emulation, I get the Classic WB screen , instead of the AmigaDOS install instructions .
I added a hardfile , df0, pointing to \ClassicWB_ADVSP_v28\System.hdf
What am I missing?
Thanks, Peter
-
Which of the CWB packages are you planning on using?
In either case this is how I did it, I installed to a real miggy but should be the same.
1> Mount the System.HDF from the Classic WB zip in UAE, using what ever system config (mine was a pimped A600), and start.
2> Provide the workbench disk images needed, I have Amiga Forever so have them all, it will not install without the WB images.
3> Let it do the install and swap disks as needed.
4> Once that is done reset the emulator and make sure it installed correctly.
5> Create a new HDD using the inbuilt UAE tools.
6> Mount both HDD's and reset the emulator holding both mouse buttons down.
7> Select DH0 and let it get to Workbench.
8> Format the new HDD.
9> Reset, doing the hold both mouse buttons and selecting DH0, and then use DOPUS to copy everything from the System.HDF to your freshly formatted HDD.
Sit back and wait :) Once done remove the System.HDF and it should boot from the new HDD image.
-
Hi ,
I am using Classic WB ADVSP (since I have a aca1232 card).
As soon as I hit 'start' in step 2, it runs classicwb instead of running the install.
Also, do I need to attach my 4gb disk ?
Thanks, Peter