Amiga.org

Amiga computer related discussion => Amiga Hardware Issues and discussion => Topic started by: Mr_Byte on April 18, 2014, 10:35:25 AM

Title: Philips cm8833-ii and indivision 1200
Post by: Mr_Byte on April 18, 2014, 10:35:25 AM

Hello there

I currently using a lcd monitor with my amiga 1200 with Indivision mk2. I have ordered a philips cm8833-ii monitor for some classic gaming action. Do i need to take out my indivision before i can use the phillips? I hope not...

Title: Re: Philips cm8833-ii and indivision 1200
Post by: danbeaver on April 18, 2014, 01:34:29 PM

No.

Title: Re: Philips cm8833-ii and indivision 1200
Post by: Mr_Byte on April 18, 2014, 03:16:27 PM

ok so i can keep the indivision in the amiga and just connect the monitor to the standard video port?

Title: Re: Philips cm8833-ii and indivision 1200
Post by: danbeaver on April 18, 2014, 04:30:58 PM

Yes

Title: Re: Philips cm8833-ii and indivision 1200
Post by: danbeaver on April 18, 2014, 06:07:16 PM

I haven't experimented with my Indy AGA's to see if they will go as low at 15.625Khz, but otherwise directly to a 23-to-15 pin VGA adapter.

Title: Re: Philips cm8833-ii and indivision 1200
Post by: Oldsmobile_Mike on April 18, 2014, 06:24:32 PM

If it's anything like the Indi ECS, they both will display at the same time.  Here's a quick photo of my Miggy displaying an Indi screen on a Dell LCD monitor and the same thing on a 1084 (connected to 23-pin output) simultaneously.  The real fun comes when you add a video card into that mix, as well.  ;)