Amiga.org
Amiga computer related discussion => Amiga Software Issues and Discussion => Topic started by: vox on February 01, 2014, 06:45:28 PM
-
Hi, I am getting ready to set up SAM460ex system using Radeon 4000 HD PCI-E, SATA Card and an SSD for boot and 500GB SATA as data hdd.
Goals are:
+ To prepare a triple boot sys
AmigaOS 4.1.6+
+ MorphOS once done (for now just partition alone, one or more, FFS or wait for MOS and IceFS)
- Lubuntu 14 with XFCE, LXDE, MATE, KDE, one home one data one swap
Thats all for SSD
How to make shared data partitions (FAT32?) on other HDD.
Which SLB should I use? Panthelope?
Is there any good Uboot guide, with SAM460ex you get no Uboot guides
-
Bump no ideas on http://en.wikipedia.org/wiki/Uboot
Found [[Category:Firmware]]
http://www.denx.de/wiki/publish/U-Bootdoc/U-Bootdoc.pdf
http://www.denx.de/wiki/U-Boot/MiniSummitELCE2014
Also more advanced model exists
http://wiki.barebox.org/doku.php
Sadly no Uboot manual is supplied with SAM 460ex.
Looks a bit better then CFE, which Steven says will not be updated.
Also, Uboot will be back with X5000 - Cyrus
Why Hyperion and ACube dont go to summit (strangely, UBoot @SAMs is maintained by Acube,
and with X5000-Cyrus and X1000 CFE by Hyperion - who does what anymore?)
-
@vox
I've never bothered installing Linux on my Sam460, but try the guide here (http://jabirulo.site90.com/sam460ex/). Pay close attention to how you should partition your hard disk.
Hans
-
@vox
I've never bothered installing Linux on my Sam460, but try the guide here (http://jabirulo.site90.com/sam460ex/). Pay close attention to how you should partition your hard disk.
Hans
Step by step manual ... THANKS HANS! You are way better then some Hanses I do know, tell me once you have more products. Me and DJ Nick have 3 Radeon HD drivers so we can spear one.
Linux is badly needed to make use of SAM until MOS comes, so you should be inteterested.